Strobelight - LightBoost Utility for AMD/ATI and NVIDIA

[Wolrajh]

(10-06-2013 06:18 PM)ToastyX Wrote:  I don't know why you're getting that message. I don't have a way to test stereoscopic 3D. I tried tricking the driver into enabling stereoscopic 3D, but I still don't get that message.

Are the installed refresh rates available in the Windows screen resolution settings?

Try using CRU and import this: https://www.monitortests.com/lightboost-test.bin

Does that let you enable stereoscopic 3D properly? That will swap the strobing on/off refresh rates, so the strobing options will be reversed.

Yes, this works. Stereo is OK with no obnoxious messages, and Lightboost is indeed activated in 2D when I select the 121hz refresh rate. Obviously, StrobeLight doesn't work anymore ( considered de-activated when I swap to the 121hz custom resolution ) but the brightness can be modified directly from the monitor menu.

The Nvidia 3D Vision 2 kit apparently forces a 120hz RR upon the game in order for the stereoscopic display to work ( BF3 seems to accept a 144hz RR even in stereo though ), but it goes back to wherever the desktop was set to upon leaving the stereo-enabled application.
I'll have to test whether the trick still works when I try to play a game in pure 2D mode, though. Also, I'll have to add 144hz back but I reckon this won't be a big problem

May I suggest then that you add 120hz non-strobbed as another choice for any StrobeLight future update ? Obviously this would have to be mutually exclusive with 120hz strobbed...