Strobelight - LightBoost Utility for AMD/ATI and NVIDIA

[Muezzin]

(02-08-2015 05:40 PM)ToastyX Wrote:  

(02-07-2015 05:26 PM)Muezzin Wrote:  Hi i have a problem and wondering if anyone can help. I have an ASUS VG248QE GSYNC monitor which i am currently using with an AMD 295x2. I understand that ULMB may not work (it does not for me) however the strobelight utility does not work also - 'No compatible display found'. Any help would be appreciated. Thank you.

The G-SYNC version has completely different hardware, so I don't know if it's compatible. Renaming strobelight.exe to strobelight-debug.exe will leave a debug.txt file that should show you where it's failing.

"3D = ERROR" would mean LightBoost is not supported, or there's a problem communicating with the monitor.

"VENDOR = 0x## (unsupported)" would mean the monitor has a vendor code that isn't supported by Strobelight. If the code happens to be 0x6E, then there might be a communication problem.

Thanks for the info. It seems that my error is none of the above, it is as follows;

[2015-02-08 18:36:10.198] LOAD(AMD): LoadLibrary("atiadlxx.dll") = SUCCESS
[2015-02-08 18:36:10.207] LOAD(AMD): ADL_Main_Control_Create() = SUCCESS
[2015-02-08 18:36:10.207] LOAD(NVIDIA): NvAPI_Initialize() = ERROR -2
[2015-02-08 18:36:10.338] INIT(AMD, 6): ADL_Display_DisplayInfo_Get() = ERROR -1
[2015-02-08 18:36:10.338] INIT: No compatible displays found.

I downloaded atiadlxx.dll from the first post as it was failing before that. Now it seems it fails on Nvidia which i presume does not concern me, however i am unsure how to remedy the last error; 'INIT(AMD, 6): ADL_Display_DisplayInfo_Get() = ERROR -1'?