Custom Resolution Utility (CRU)

[ToastyX]

(06-30-2022 04:25 PM)SeeNoWeevil Wrote:  No, it doesn't, it's very odd.

Disable steam on boot
Add CRU changes
Reboot
Scan for changes (nothing)
Open steam (480i)

What about this? https://www.reddit.com/r/pcgamingtechsup...pen_steam/

That shouldn't have changed automatically though.

[ToastyX]

(06-30-2022 05:48 PM)IIISi Z16 HF LE Wrote:  So u so blind and u need googles or glasses with thick lenses
see last feature first picture called smart Vsync

Smart VSync has nothing to do with Dynamic Refresh Rate.

https://www.intel.com/content/www/us/en/...phics.html

[IIISi Z16 HF LE]

Hi well not really
I am using thunderbolt 4 from my laptop which is DisplayPort 1.4 combined
So DP supports 4k@120 with override .. Native is 4k@60
I have realized that I have poor cable , which supports only 4k@60 (first pic )
And I have purchased now 8k@60 4k@120 cable
So it should work .. Many ppl in answers confirmed it will work

The guy which is asking has good point !
Now new laptops has power management (from 11gen)
I just tried it
So there is no dynamic refresh rate reducing same like on smartphones
BUT I found out depending on settings in intel c panel .
When I unplug charger it automatically switches to 60Hz when I plug charger back it switches to 165Hz

Thanks

[caRc]

i dont really know if everyone still active there but i have a problem, cru works when i set custom resolution higher than 800x600 but it doesnt work when i made it below than it any solution? (i use amd btw)

[ToastyX]

(Yesterday 02:11 PM)caRc Wrote:  i dont really know if everyone still active there but i have a problem, cru works when i set custom resolution higher than 800x600 but it doesnt work when i made it below than it any solution? (i use amd btw)

Windows does not list resolutions below 800x600 in the display settings, but they are available for programs to use.

[caRc]

(Yesterday 09:05 PM)ToastyX Wrote:  

(Yesterday 02:11 PM)caRc Wrote:  i dont really know if everyone still active there but i have a problem, cru works when i set custom resolution higher than 800x600 but it doesnt work when i made it below than it any solution? (i use amd btw)

Windows does not list resolutions below 800x600 in the display settings, but they are available for programs to use.

so is there a way that you can set it below for program?