Monitor Tests Forum - Custom Resolution Utility (CRU)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814

I have Lenovo Ideapad 5 14ITL05. And a graphic card is intel iris xe. I tried overclock my monitor but the maximum is 67hz and more is black screen issue. How can I do more?

Thanks for this invaluable utility. I made custom resolution 1368 x 912 for Surface Pro 4 and some games work well, but most just shows black screen with audio. Any idea is appreciated.

I'm using (CAC-1331) Hdmi 2.0 to Displayport 1.2 Active Adapter. I have a displayport 1.4 monitor 1440p 144hz, trying to get 2560 x 1440 resolution 120hz with the adapter (using intel gpu). When I used adapter it would only let me choose 1024 x 768 and 800 x 600 resolutions.
I tried CRU and read the start but still don't really get it, when I added 1080p to standard resolution it worked, but it wouldn't let me type 2560 x 1440 in custom resolution or whatever. I also remember reading the starting post that I don't add it there but in detailed resolution instead? But it was already at 2560 x 1440 by default there but for some reason that resolution doesn't show up on windows options.
Can anyone help me on how I'm supposed to do this exactly?

(08-15-2021 04:31 PM)MasterofSalt Wrote: [ -> ]Hello, 6900 XT with a Dell s3220dgf freesync flickering issue. One of the fixes is to set the freesync range to 80-164 from 48-164. However it does not appear to be working. Range remains 48+, connected via DP port, and set V range via both "detailed resolution" (which weirdly shows the current refresh rate at 59.950, even with the monitor and drivers both telling me its at 164 Hz) and via the Extension Blocks. Any ideas?

I don't understand what you're saying. The lower end of the FreeSync range isn't set with a detailed resolution, and CRU doesn't show the current refresh rate. The FreeSync range for DisplayPort is set using the range limits (use the "Edit..." button at the top).

(08-16-2021 04:14 PM)Alacran Wrote: [ -> ]I have Lenovo Ideapad 5 14ITL05. And a graphic card is intel iris xe. I tried overclock my monitor but the maximum is 67hz and more is black screen issue. How can I do more?

Probably not much you can do. Reducing the blanking/totals might give you another Hz, but that's about it.

(08-16-2021 05:52 PM)bribeired Wrote: [ -> ]Thanks for this invaluable utility. I made custom resolution 1368 x 912 for Surface Pro 4 and some games work well, but most just shows black screen with audio. Any idea is appreciated.

Make sure scaling is set to one of the GPU scaling options and not display scaling in the Intel GPU control panel.

(08-17-2021 03:02 AM)shiris Wrote: [ -> ]I'm using (CAC-1331) Hdmi 2.0 to Displayport 1.2 Active Adapter. I have a displayport 1.4 monitor 1440p 144hz, trying to get 2560 x 1440 resolution 120hz with the adapter (using intel gpu). When I used adapter it would only let me choose 1024 x 768 and 800 x 600 resolutions.
I tried CRU and read the start but still don't really get it, when I added 1080p to standard resolution it worked, but it wouldn't let me type 2560 x 1440 in custom resolution or whatever. I also remember reading the starting post that I don't add it there but in detailed resolution instead? But it was already at 2560 x 1440 by default there but for some reason that resolution doesn't show up on windows options.
Can anyone help me on how I'm supposed to do this exactly?

You need a GPU with HDMI 2.0, and you shouldn't need to add custom resolutions because the monitor already defines the resolutions. Make sure the extension block has both an HDMI data block and an HDMI 2.0 data block.

(08-17-2021 03:10 PM)ToastyX Wrote: [ -> ]
(08-15-2021 04:31 PM)MasterofSalt Wrote: [ -> ]Hello, 6900 XT with a Dell s3220dgf freesync flickering issue. One of the fixes is to set the freesync range to 80-164 from 48-164. However it does not appear to be working. Range remains 48+, connected via DP port, and set V range via both "detailed resolution" (which weirdly shows the current refresh rate at 59.950, even with the monitor and drivers both telling me its at 164 Hz) and via the Extension Blocks. Any ideas?
I don't understand what you're saying. The lower end of the FreeSync range isn't set with a detailed resolution, and CRU doesn't show the current refresh rate. The FreeSync range for DisplayPort is set using the range limits (use the "Edit..." button at the top).

Please see pics attached. Tried both setups separate and together, and on each of the 3 entries for my monitor (only one listed as active).

I didn't think the detailed resolution showed the active setup, but wanted to let you know just in case.

(08-17-2021 06:52 PM)MasterofSalt Wrote: [ -> ]Please see pics attached. Tried both setups separate and together, and on each of the 3 entries for my monitor (only one listed as active).

I didn't think the detailed resolution showed the active setup, but wanted to let you know just in case.

Well something is wrong because it shouldn't show "Default extension block" in the list with an AMD GPU. Run reset-all.exe and restart. Is CRU is able to read the extension block after that?

(08-17-2021 07:19 PM)ToastyX Wrote: [ -> ]
(08-17-2021 06:52 PM)MasterofSalt Wrote: [ -> ]Please see pics attached. Tried both setups separate and together, and on each of the 3 entries for my monitor (only one listed as active).

I didn't think the detailed resolution showed the active setup, but wanted to let you know just in case.
Well something is wrong because it shouldn't show "Default extension block" in the list with an AMD GPU. Run reset-all.exe and restart. Is CRU is able to read the extension block after that?

It's still there, but now there is only 1 entry per monitor not 2 for the secondary and 3 for the primary... I can select Delete on "default extension block"...