Quick question when i use this program and have a custom res i get some kind of ant war, and i dont get that when i use a normal res, its like i can see lines on the monitor
no clue how to show it to you guys but its annoying
and the weird thing is that sometimes when i change the res of my computer its not happening
3DTV Play projector (geforce)
For "3DTV Play" it only uses "TV resolution"...
Whether "Detailed resolutions" or "CAT-861" which always works well in 2D as soon as I switch to 3D it takes "TV resolution"
![[Image: CRU.jpg]](https://i.ibb.co/D7gWBNY/CRU.jpg)
Is there a way to change them ?!
(04-30-2022 09:14 PM)vanden Wrote: [ -> ]For "3DTV Play" it only uses "TV resolution"...
Whether "Detailed resolutions" or "CAT-861" which always works well in 2D as soon as I switch to 3D it takes "TV resolution"
https://i.ibb.co/D7gWBNY/CRU.jpg
Is there a way to change them ?!
3DTV Play only supports 1280x720 @ 60 Hz and 1920x1080 @ 24 Hz.
3DTV Play only supports 1280x720 @ 60 Hz and 1920x1080 @ 24 Hz.
Yes my problem is 23.976 and 24 Hz....
By setting the frequency to 23 hz or 24 hz (in Windows) when it goes to 3D it goes all alone to 23.976 hz (when film 23.976) or 24 hz (when film has 24 hz).
Only the resolution 1920*1080 @ 24Hz in "TV resolution" the problem and that I have a frame every 40 min which zaps ...
In 2D I have no lost frames (MPC HC/MADVR: no frame drops/repeats expected)
Is there a way to change the timings in "TV resolution"?
This one works very well in 2D
![[Image: CRU2.png]](https://i.ibb.co/rcSdgNx/CRU2.png)
It's 3 timing are ok in 2D :
638 / 44 / 160 = 842 / 1920 = 2762 / +
4 / 5 / 40 = 49 / 1080 = 1129 / +
74.77 mhz
638 / 44 / 192 = 874 / 1920 = 2794 / +
4 / 5 / 42 / = 51 / 1080 = 1131 / +
75.77 mhz
638 / 44 / 148 = 830 / 1920 = 2750 / +
4 / 5 / 24 = 33 1080 = 1113 / +
73.39 mhz
TV resolution 3D 40min drop :
(madVR CTA CTA timing parametrers for digital TVs)
638 / 44 / 148 = 830 / 1920 = 2750 / +
4 / 5 / 36 = 45 / 1080 = 1125 / +
74.18 mhz
Hello Lads, I'm new here and i've been trying to squeeze a little more performance out of my monitor. My Screen's an Acer XR341CK (the freesync model) and I just cant get it's refresh rate above the stock 75Hz without frame skipping. Is there any way to get this to work or is my monitor just a lost cause?
(05-03-2022 11:47 AM)Phibbl Wrote: [ -> ]Hello Lads, I'm new here and i've been trying to squeeze a little more performance out of my monitor. My Screen's an Acer XR341CK (the freesync model) and I just cant get it's refresh rate above the stock 75Hz without frame skipping. Is there any way to get this to work or is my monitor just a lost cause?
FreeSync needs to be enabled to avoid frame skipping with that monitor. The FreeSync range needs to include the higher refresh rate.
(05-02-2022 03:50 PM)vanden Wrote: [ -> ]Is there a way to change the timings in "TV resolution"?
No, 3DTV Play only supports the CTA-861 standard, which is what the TV resolutions use.
(05-03-2022 02:09 PM)vanden Wrote: [ -> ]@ philbbl
How do you see frame skipping ?
Have you tried this to see ?
https://www.testufo.com/frameskipping
https://www.testufo.com/images/screensho...g-ugly.jpg
Yes, that's exactly how i tested it.
[/quote]
FreeSync needs to be enabled to avoid frame skipping with that monitor. The FreeSync range needs to include the higher refresh rate.
[/quote]
Damn, what a bummer. With freesync enabled Overdrive doesn't work for sure. But a couple more Hz would still be appreciated. Do i just have to change "range limits" in CRU?