Monitor Tests Forum

Full Version: Custom Resolution Utility (CRU)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810
Hi ToastyX.

I'm wondering if I just destroyed my laptop monitor.

I have a Lenovo Legion gaming laptop with an Intel GPU and Nvidia RTX2080 GPU that G-sync's to my 1920x1080p laptop screen and only runs at 144Hz.

It's 2023, but I recently bought Lego Indiana Jones (from 2008) on Steam and discovered that it throws an error and won't run on anything higher than 60Hz. There's no way to change the refresh rate in Windows 10 or with Nvidia's control panel, so I was directed to your CRU. I opened it, and clicked "add" under Detailed Resolutions. A new profile popped up and was already set at 1920x1080/60Hz, so I added it and used your restart.exe.

The game now loaded successfully, but it was super dark and there were ghosting issues like crazy. All the underlying screens seemed to appear on top of the game (for example, the title screen was still visible as a ghost image once the game started). I thought it was an issue with the game, so I tried to adjust some settings to brighten the screen, etc. I tried many paths, but much to my horror, upon switching back to 144Hz, my regular Windows desktop retained the ghost images. Even after restarting, my black POST screen showed my desktop icons in a ghost image.

Have I ruined my laptop screen? I reverted everything, but the ghosting is still there.

Help
(02-21-2023 12:01 AM)HighTechGeek Wrote: [ -> ]Hi ToastyX.

I'm wondering if I just destroyed my laptop monitor.

I have a Lenovo Legion gaming laptop with an Intel GPU and Nvidia RTX2080 GPU that G-sync's to my 1920x1080p laptop screen and only runs at 144Hz.

It's 2023, but I recently bought Lego Indiana Jones (from 2008) on Steam and discovered that it throws an error and won't run on anything higher than 60Hz. There's no way to change the refresh rate in Windows 10 or with Nvidia's control panel, so I was directed to your CRU. I opened it, and clicked "add" under Detailed Resolutions. A new profile popped up and was already set at 1920x1080/60Hz, so I added it and used your restart.exe.

The game now loaded successfully, but it was super dark and there were ghosting issues like crazy. All the underlying screens seemed to appear on top of the game (for example, the title screen was still visible as a ghost image once the game started). I thought it was an issue with the game, so I tried to adjust some settings to brighten the screen, etc. I tried many paths, but much to my horror, upon switching back to 144Hz, my regular Windows desktop retained the ghost images. Even after restarting, my black POST screen showed my desktop icons in a ghost image.

Have I ruined my laptop screen? I reverted everything, but the ghosting is still there.

Help
Leave it on for a few hours at 144 Hz and it should fade away. Panels that don't support 60 Hz are not common, but I'm seeing it more in certain gaming laptops. If it can't handle a standard 1920x1080 @ 60 Hz without freaking out like this, I would consider that a poorly-designed panel. To add a working 60 Hz, you need to copy/paste the 144 Hz timing parameters, and then change the timing to the vertical total calculator, and change the refresh rate to 60 Hz without changing the pixel clock. Since the panel supports G-SYNC, this should work in theory because it increases the blanking while keeping the pixel clock the same, similar to how G-SYNC works.
(02-20-2023 02:49 AM)Elias Wrote: [ -> ]Hi @ToastyX, I have a few concerns and issues. I have a LG27GN7 240hz monitor, and I am trying to get a resolution of 1720x1080 using CRU.

To begin, when I try to edit my extension block timings the only 1920x1080 option is 144hz when my monitor is 240hz. There is no 240hz option so naturally, I manually changed the hertz to 240 after pressing edit on the detailed resolution of 1920x1080 @143.980 Hz (I have included an image). I am confused as to why I did not have a 1920x1080 @240hz option come up for me.

After copying the timings, deleting all standard resolutions and creating a new one at 1920x1080 @60HZ and pasting the timings into a new detailed resolution, where I had to change the hertz to 240hz from 143.980hz again. I run restart64, and put on the 1720x1080 @240hz res on from the list mode in windows.

After putting on this new res I created, I get a black vertical bar going down the middle of my screen and I have no clue why. I do not know if it is because I had edited the hertz of the resolution in CRU to 240hz when it was originally 140hz even though my monitor is 240hz.

Please help me, I don't know why I am getting a black bar in the middle of my screen

Thank you.
You're not showing the whole thing. 240 Hz exists somewhere. I looked up the EDID for this monitor, and it has 1920x1080 @ 240 Hz as the first detailed resolution in the main window. You don't need to add it again. You can just add 1720x1080 @ 240 Hz. If the monitor can't display that correctly, then you'll have to use GPU scaling.
(02-18-2023 06:45 PM)JacobBathead Wrote: [ -> ]Hi, having a bit of a strange issue.

So, I have a video wall that should run native at 672x384. When plugged into my MacBook Pro 2015 running windows, it seemingly picks up this resolution automatically and it all runs fine.

However, when on my Lenovo laptop (AMD with Radeon graphics/RTX3060), windows only sees it at 1024x768, 800x600, and 640x480). When opening CRU, it automatically picked up the right resolution (672x384) within detailed resolutions, however even upon restart of the display drivers it does not show up in the windows display resolution box.

Do you know what I would need to do to make it appear as an available resolution?

Thanks!
If CRU shows the correct resolution but Windows doesn't, then either the correct graphics drivers are not installed, or the driver is not allowing the resolution for some reason. AMD+NVIDIA is an unusual combination. You need to make sure you have the correct graphics drivers installed for both.
(02-17-2023 08:55 AM)Kapky Wrote: [ -> ]Hello,

I just found out this great utility and I would like to ask you about some help as I don't know where to find the solution Confused

Display:
- LG L245WP-BN (official LG drivers installed) connected to my miniPC via HDMI cable

PC:
- Intel NUC (CPU: i5-5250/8GB RAM/GPU: Intel HD Graphics 6000) with 64bit Windows 10 Pro

I was trying to connect this old display to my miniPC but the whole screen is cropped/shifted as can be seen at attached photos.

I was trying to check and overwrite the EDID of the display (EDID dumped via Phoenix EDID Designer) but as far as I know these problems are usually connected to NVIDIA GPUs. Anyway, I checked the EDID of the display in registry (regedit) but the table is very the same as the result from Phoenix EDID so there was nothing to change.

When I launch the CRU, there are also no other extension slots that could be deleted.

Do you have any idea how to solve this problem? I don't want to throw the display in the trash as it is basically OK Undecided

Thanks a lot for your help!
You're complicating things with multiple programs. Your CRU screenshot is showing something was changed. Run reset-all.exe and reboot to restore the original EDID. Then use CRU only to delete the extension block for the monitor and reboot again. If that doesn't have any effect, then you might have an older Intel graphics driver that doesn't support EDID overrides. In that case, use the alternative method by using the "Export..." button to export a .exe file. Then run the .exe file, and install the EDID override. Then reboot, and hopefully that should work. The main issue with this monitor is it doesn't handle 1920x1200 correctly with HDMI signals, so deleting the extension block will remove the HDMI stuff and treat it as single-link DVI.
(02-17-2023 12:17 AM)jburleson115 Wrote: [ -> ]I tried this, and im still receiving the black screens I literally done everything you said im on latest drivers, and everything, I found out when clicking restart64 it re-enables the drivers but I will get a black screen within 20 or so minutes, and drivers are disabled again? what could possibly be wrong is my GPU screwed up possibly? I may have failed to mention that this use to not occur on older AMD drivers I use to be able to turn on, and play games right away all the time with zero issues on older drivers.
The graphics driver getting disabled usually means the driver crashed. Either there's a hardware problem, or some GPU-related software is causing a problem. If the problem only happens after turning on the computer but not after a reboot, it could be an issue that only happens with fast startup. In that case, try disabling fast startup: https://www.howtogeek.com/856514/how-to-...indows-10/
(02-16-2023 05:13 PM)oneils Wrote: [ -> ]Hello. I have a CRT Monitor (Compaq p920). The monitor specs indicate it can do 30 to 108khz on the horizontal frequency:

http://www.compaq.com/products/quickspec...84_na.HTML

I am not sure what that means.

I'd like to add detailed resolutions for 640x480, 800x600, and 1024x768, with high refresh rates. I am using a Windows 10 machine with a gtx 770. I have the monitor connected to the video card using a vga cable (from the monitor) and a vga/dvi adapter plugged into the video card's dvi-A port.

Is there something I should be aware of before doing this (e.g., can I risk damaging the monitor?). Any advice?
Usually monitors with an on-screen menu will refuse to display any resolutions that are out of supported range, so there should be no problem as long as you stay within the supported frequency range. CRT monitors are usually limited by the horizontal frequency. Horizontal frequency is just the total number of lines per second including blanking as shown in CRU.
(02-21-2023 03:44 AM)ToastyX Wrote: [ -> ]
(02-21-2023 12:01 AM)HighTechGeek Wrote: [ -> ]Hi ToastyX.

I'm wondering if I just destroyed my laptop monitor.

I have a Lenovo Legion gaming laptop with an Intel GPU and Nvidia RTX2080 GPU that G-sync's to my 1920x1080p laptop screen and only runs at 144Hz.

It's 2023, but I recently bought Lego Indiana Jones (from 2008) on Steam and discovered that it throws an error and won't run on anything higher than 60Hz. There's no way to change the refresh rate in Windows 10 or with Nvidia's control panel, so I was directed to your CRU. I opened it, and clicked "add" under Detailed Resolutions. A new profile popped up and was already set at 1920x1080/60Hz, so I added it and used your restart.exe.

The game now loaded successfully, but it was super dark and there were ghosting issues like crazy. All the underlying screens seemed to appear on top of the game (for example, the title screen was still visible as a ghost image once the game started). I thought it was an issue with the game, so I tried to adjust some settings to brighten the screen, etc. I tried many paths, but much to my horror, upon switching back to 144Hz, my regular Windows desktop retained the ghost images. Even after restarting, my black POST screen showed my desktop icons in a ghost image.

Have I ruined my laptop screen? I reverted everything, but the ghosting is still there.

Help
Leave it on for a few hours at 144 Hz and it should fade away. Panels that don't support 60 Hz are not common, but I'm seeing it more in certain gaming laptops. If it can't handle a standard 1920x1080 @ 60 Hz without freaking out like this, I would consider that a poorly-designed panel. To add a working 60 Hz, you need to copy/paste the 144 Hz timing parameters, and then change the timing to the vertical total calculator, and change the refresh rate to 60 Hz without changing the pixel clock. Since the panel supports G-SYNC, this should work in theory because it increases the blanking while keeping the pixel clock the same, similar to how G-SYNC works.

Thank you for the speedy reply. And I'm glad to hear it will fade with time. I can see it's mostly faded away at this point. Whew.

I think I'll forego playing this old game and not risk any long term damage to my screen (the laptop is from 2019). I suppose I can always connect an external monitor some day. Thanks again for building, maintaining and supporting these tools for so many years. Cheers!
Every time I boot up in Windows 10 it starts up at 640x480@60 resolution and I need to put a restart.exe process (it takes some time to open) in my shell:startup folder to go back to 1920x1080@120, is there any way to fix this so I don't have to wait for the restart.exe to run?
Hi Toasty.

Am using CRU to set a custom resolution on my old crt tv. Using an hdmi to av converter(DISPLAY ID:LTM0000) from my laptop with an intel igpu.

when I set the resolution and switch to it the text is a bit faded and the image gets blurry. I tried all the timings and tried copying the default timing and just modifying the resolution but it all has the same effect.

The only way to get it to display correctly is setting a high refresh rate then choosing the default one in the display settings. now I can live with that but some games opt in for the higher refresh rate with no way of changing it which also has frame skipping and the blurriness.

Thanks in advance.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810
Reference URL's