Monitor Tests Forum

Full Version: Custom Resolution Utility (CRU)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440
even tho my cpu says its at 60hz ,when i run iracing an rfactor with vsync on i am getting 120fps !! guess i dont need to mess with anything then ? thanks for your help !!


steve
Greetings,

I am currently trying to add a working custom resolution to my system using CRU. I am running a Radeon 280x with catalyst 13.12 and a Dell U2412M monitor.
Sadly after setting up the resolution and rebooting, I can not set the resolution in the system. The monitor says that the current input timing would not be supported.
I tried uninstalling monitor drivers, which did not help. Also, alternative DVI mode is activated in AMDs CCC.
Attached is a picture of my settings Smile
(03-17-2014 02:20 PM)Jaffi Wrote: [ -> ]I am currently trying to add a working custom resolution to my system using CRU. I am running a Radeon 280x with catalyst 13.12 and a Dell U2412M monitor.
Sadly after setting up the resolution and rebooting, I can not set the resolution in the system. The monitor says that the current input timing would not be supported.
You're trying to set a resolution that the monitor doesn't support. Furthermore, you're sending a resolution that requires dual-link DVI to a single-link DVI monitor.
(03-17-2014 02:38 AM)dice65 Wrote: [ -> ]even tho my cpu says its at 60hz ,when i run iracing an rfactor with vsync on i am getting 120fps !! guess i dont need to mess with anything then ? thanks for your help !!
Where does it say 60 Hz? Have you tried setting the refresh rate to 120 Hz? Some games will use the desktop refresh rate, while other games have their own settings. Does the TV report 120 Hz when the game is running?
(03-17-2014 05:47 PM)ToastyX Wrote: [ -> ]
(03-17-2014 02:20 PM)Jaffi Wrote: [ -> ]I am currently trying to add a working custom resolution to my system using CRU. I am running a Radeon 280x with catalyst 13.12 and a Dell U2412M monitor.
Sadly after setting up the resolution and rebooting, I can not set the resolution in the system. The monitor says that the current input timing would not be supported.
You're trying to set a resolution that the monitor doesn't support. Furthermore, you're sending a resolution that requires dual-link DVI to a single-link DVI monitor.

You are right, I now tried 2.880 x 1.800@60Hz. But this resolution I can not choose in windows or games, why is that Huh
Also, to completely reset the modifications from CRU, is it enough to just hit the reset button in the top right corner for the active display?

Thanks very much!
(03-17-2014 07:34 PM)Jaffi Wrote: [ -> ]You are right, I now tried 2.880 x 1.800@60Hz. But this resolution I can not choose in windows or games, why is that Huh
You are running into pixel clock limits. Dual-link DVI is limited to 330 MHz pixel clock and single-link DVI is limited to 165 MHz unless the driver is patched. You will not be able to get 2880x1800 @ 60 Hz with a single-link DVI monitor.

(03-17-2014 07:34 PM)Jaffi Wrote: [ -> ]Also, to completely reset the modifications from CRU, is it enough to just hit the reset button in the top right corner for the active display?
You can use the "Delete" button at the top-right corner to delete the override for one monitor, or you can run reset-all.exe to delete all overrides. That will completely remove any modifications.
im showing 5760x1080 at 60hz in the ccc , also in windows in the display settings on win 7 , i dont remember seeing the TVs flash 120 hz , in the rfactor video setup config exe it also is set to 60hz , 120hz is not av , both the games ran at 60fps with vsync on before i got these TVs , with vsync on they should be running at 60 but there running at 120 fps ,i would still love to be able to send true 120hz signal to them tho via ccc , what should we try ? im open to anything lol , thanks again Toastyx !!


steve
Hey guys. I have a Qnix 2710, which I've been overclocking with this great tool combined with the atimdag patcher from day one, 120hz is no problem at all.

However, yesterday I updated my driver to the latest ATI beta (14.3), which put my monitor into a test loop because it couldn't understand the input it was getting anymore. It happened right when the driver started up, in the middle of the installation process. Is this due to an incompatability in this tool, or is it the patchtool which doesn't work? I tried patching the new driver, while using a secondary monitor, but it didn't get out of test mode until I restored the stable driver.

Any advice?
Decided I'd jump in and try to edit my monitor's resolution without knowing the first thing about it. I have a few questions if anyone wouldn't mind answering them that'd be great.

I'm using a DELL U3011 with an R9 200 Series GPU driver 14.03 and I've applied the Pixel Clock Patcher.

I found my monitor used a Dual-Link DVI and from what I read I should be able to use custom resolutions that use a 330MHz or less pixel clock. The default max resolution uses 268.50 MHz. But when I try any resolution over 2560x1600 I just get the message "The current input timing is not supported by the monitor display."

I've tried all different combinations of resolutions but it will not display above 1600p, why?
^ in your case, a (supported) custom 'resolution' is still at 2560x1600 but at a refresh rate other than 60Hz. Your probably stand a decent chance of getting it to accept 67-75hz but always at the native 2560x1600.

To my knowledge, CRU isn't used to force a different aspect ratio to LCDs than what they are designed to support
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440
Reference URL's