(06-25-2014 12:42 AM)partogi Wrote: [ -> ]My monitor is Crossover 27Q. Native is 2560x1440@60 Hz.
Should I patch the driver?
Patching the driver won't help with lower refresh rates.
(06-22-2014 12:32 PM)La9000 Wrote: [ -> ]What settings for 75Hz refresh rate can you recommend for me? I'm using Dell 2414H connected via DisplayPort cable with my new GTX 780.
Have you tried adding a detailed resolution and just changing the refresh rate? If that doesn't work, try the "LCD standard" and "LCD reduced" timing options.
(06-20-2014 08:38 PM)totto2k Wrote: [ -> ]Hi,
first of all thanks for providing us your great tool!
Here comes my question...
i am using Nvidia Driver 337.88 (on Geforce GTX 770 from Asus)
my screens used for my Triple Screen setup:
2 side screens (22 inch - 1680 x 1050):
Synchronization Range
Horizontal (Analog/Digital) 31.5-82.3 kHz
Vertical 56-75 Hz
Center Screen( 24 inch - 1920 x 1200)
Synchronization Range
Horizontal (Analog/Digital) 31.5-81.1 kHz
Vertical 56-76 Hz
I wanted to create a working setup with 1680*1050 for each screen.
it is working good but after a reboot, the "effect" has gone and the screens turn back to 60 Hz instead of 58 which I set for all screens before with CRU.
I already tried both methods for Nvidia cards ( disable the extension block and make sure GeForce Experience and Samsung Magician are not installed, or enable the extension block and import this file: blank-extension.dat)
Is this an issue with the current Nvidia driver?
I created an attachement (screenshot)
i use the CRU to get rid of this issue:
http://www.assettocorsa.net/forum/index....ost-167541
I can't see the thread. Are you using Surround? NVIDIA broke EDID overrides with Surround in 331.40. The last working driver is 327.23:
http://www.nvidia.com/object/win8-win7-w...river.html
Hello, New user here. I have a X-star running at 100hz in Nvidia control panel with a GTX570 w/ Pixel clock patcher on. I'm having a problem with the CRU, however...
In detailed Resolutions, i have added a new 1440p resolution set at 100.00hz. So now, when i go to a game, it shows that i can set the game's refresh rate to 100hz, but when i enable it, my actual fps goes to 50! So for some reason, i'm getting half the refresh rate that i set it to in detailed resolutions. Any ideas?
(06-30-2014 11:39 PM)makotech222 Wrote: [ -> ]Hello, New user here. I have a X-star running at 100hz in Nvidia control panel with a GTX570 w/ Pixel clock patcher on. I'm having a problem with the CRU, however...
In detailed Resolutions, i have added a new 1440p resolution set at 100.00hz. So now, when i go to a game, it shows that i can set the game's refresh rate to 100hz, but when i enable it, my actual fps goes to 50! So for some reason, i'm getting half the refresh rate that i set it to in detailed resolutions. Any ideas?
The refresh rate should not affect the frame rate unless you're using vsync. With vsync, if the video card is not powerful enough to render 100 FPS, the frame rate will drop to 50 FPS.
Hmm I never knew that... Anyway to circumvent that?
(07-01-2014 10:48 PM)makotech222 Wrote: [ -> ]Hmm I never knew that... Anyway to circumvent that?
That's the way vsync works. Either disable vsync, or try NVIDIA's adaptive vsync option, which only activates if the frame rate is greater than the refresh rate.
the program says that none of my monitors are active and when i make custom resolutions they dont show up in the properties of the monitor D: any tips?
(07-05-2014 06:09 PM)MAx Wrote: [ -> ]the program says that none of my monitors are active and when i make custom resolutions they dont show up in the properties of the monitor D: any tips?
What video card do you have? CRU gets the active status from Windows, so if none of the monitors are active, then that's a driver issue.
thanks for the answer i realized that my monitor doesnt have the proper driver installed but there are none : acer s240hl when i download the driver on the website it only contains an .ini data not more