Monitor Tests Forum

Full Version: NVIDIA Pixel Clock Patcher
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Do not install 326.19. It has a problem with detecting many of the 27" Korean monitors. 326.01 works though.

I've updated the patcher to fix the SL-DVI/HDMI limit with 326.01. I don't think the SL-DVI/HDMI check is needed anymore, so it won't be listed if it's not found. It was needed to make 2560x1440 @ 60 Hz and 1920x1080 @ 100+ Hz work properly over SL-DVI/HDMI, but that seems to work now with just the SL-DVI/HDMI limit changed.
I'm not sure what happened with the past few drivers, but it was hell getting my tempest back on track and overclocked again. I am scarred from updating lol.... 326.01 for the next year for me... Does anyone here ever have problems with GTX 680 detecting DVI LCD monitors? I wonder if the newer cards like the titans have the same issue.
Hi all new to the forum so a big HELLO to everyone!

I am here seeking help for my monitor and thought I'd ask you pros for advice.

Okay so would it be possible for me to use the Tempest driver for my Qnix QX2710LED??

I've recently installed windows 8 and am unable to install the Catleap driver, I am currently using 320.01 NV gfx drivers.

Thanks in advance.
I'll let Toasty respond, but I seem to remember reading that this monitor doesn't need a driver
The Tempest driver is the same as the Catleap driver except for the name. You can use this for the QNIX: https://www.monitortests.com/qnix.zip

You have to temporarily disable driver signature enforcement to install it in Windows 8: http://sixcolumns.com/t/how-to-disable-a...dows-8/151

You don't need the driver if you use CRU, but it doesn't hurt to have the driver installed.
(08-03-2013 09:34 AM)ToastyX Wrote: [ -> ]The Tempest driver is the same as the Catleap driver except for the name. You can use this for the QNIX: https://www.monitortests.com/qnix.zip

You have to temporarily disable driver signature enforcement to install it in Windows 8: http://sixcolumns.com/t/how-to-disable-a...dows-8/151

You don't need the driver if you use CRU, but it doesn't hurt to have the driver installed.

Thank you for rapid reply much appreciated!
Hi,
I have a MSI GTX 680 and a ASUS VE278 60hz gaming monitor. I applied the patch,rebooted then I added 120hz refresh rate through the CRU software and then rebooted and switched to 120hz via the Nvidia Control Panel. However I get a message that monitor is out of range ? So does that mean that my monitor is unable to use the 120hz refresh rate, even with this patch ?
"Out of range" means the monitor doesn't support it. The patch is for driver limits, not monitor limits. There's no way that monitor will get 120 Hz. You might be able to get 75-85 Hz though.
Hello,
I have a question, please see here.

I didn't want to post the same question twice, but I didn't know if this belonged in the AMD or Nvidia Pixel Clock Patcher thread.

Thank you.
(08-05-2013 03:25 PM)ToastyX Wrote: [ -> ]"Out of range" means the monitor doesn't support it. The patch is for driver limits, not monitor limits. There's no way that monitor will get 120 Hz. You might be able to get 75-85 Hz though.

Max I could get by nvidia cp is 83hz. But could I get more from the CRU ?
Reference URL's