Monitor Tests Forum

Yea I Did - and it found everything fine etc. I'm not sure if I rebooted directly after or not. Will try again when I get home but was that all that was needed. It seemed like such a simply process - just extracted, run and install. hit done.

Am I missing anything at all?

AH! Never mind followed the guide over by 120hz.net and your info solved it in the manual timings section! Shot big guy thank you.

Does this work with the GeForce 327.23 driver?

(09-20-2013 09:45 PM)hutt132 Wrote: [ -> ]Does this work with the GeForce 327.23 driver?

U have to re patch it each driver update. At least I did..

I'm running 780's in SLI for my qnix 2710, I patched it and it runs 120hz just peachy. However, i also have a pair of dell 2412hm's running on my iGPU (intel 4600). when I have the 2412's running, I can only get 40-50hz (using UFO test frame skipping)

Is it a bug or...? Thanks!

---

I'm running 780's in SLI for my qnix 2710, I patched it and it runs 120hz just peachy. However, i also have a pair of dell 2412hm's running on my iGPU (intel 4600). when I have the 2412's running, I can only get 40-50hz (using UFO test frame skipping)

Is it a bug or...? Thanks!

Are you running them at the same time? If you have multiple monitors with different refresh rates, that can cause frame rate issues with desktop composition. If you have Windows 7, you can test this by switching to the basic or classic theme to turn off desktop composition. Windows 8 doesn't have a way to turn off desktop composition. You can also try moving the Dells to the 780 cards.

You da man! switching it to classic fixed it Thanks!

Heads up, Nvidia's latest beta 331.40 (for BF4) released today shows this:

Can you check if the SLI limit still needs to be patched? If it does, 2560x1440 @ 96 Hz will work properly while 110/120 Hz will not.

Also, let me know what video card you have because I'm not sure if 700-series cards still need the SLI limit patched.

I don't have an SLI setup, so I'll need someone to verify if any changes work properly.

(09-30-2013 08:35 PM)ToastyX Wrote: [ -> ]Can you check if the SLI limit still needs to be patched? If it does, 2560x1440 @ 96 Hz will work properly while 110/120 Hz will not.

Also, let me know what video card you have because I'm not sure if 700-series cards still need the SLI limit patched.

I don't have an SLI setup, so I'll need someone to verify if any changes work properly.

Applied full patch. GTX 680 SLI here. Unable to set greater than 60Hz in 2560 x 1440. Custom CRU entries only appear in 1920 x 1440 (400 Mhz limit I suppose.)