(08-20-2017 10:49 AM)laacv17 Wrote: [ -> ]Sorry, but what do you mean with that men ? I checked the specs the monitor is 120hz... Can you explain me why is not a 120hz ?
The specs list the recommended resolution as 1920x1080 @ 60 Hz with a maximum refresh rate of 75 Hz:
http://store.hp.com/wcsstore/hpusstore/pdf/1AT04AA.pdf
You might not even get 75 Hz without frame skipping with an NVIDIA card if it's like some other FreeSync monitors. You can use this test with a camera to make sure:
http://testufo.com/#test=frameskipping
Thanks for the info men!
Sent from my HTC 10 using Tapatalk
Does the patcher work on today's release of 387.92? I see they added Fast Sync support for SLI, and wanted to check if the SLI patch portion doesn't have any issues.
(10-09-2017 07:03 PM)hutt132 Wrote: [ -> ]Does the patcher work on today's release of 387.92? I see they added Fast Sync support for SLI, and wanted to check if the SLI patch portion doesn't have any issues.
It should. I don't have SLI to test it myself, but the SLI part hasn't changed.
Pls. update, driver 388.13 not work. ThankYou very much.
I can confirm v1.4.2 works for me with driver 388.13. Thanks for the fix!
Hope someone can help me out.
Been using these overclock tools for years with AMD cards and never had an issue. Yesterday I just upgraded to a Nvidia 1070 and everything seems to work as normal except I'm not getting the refresh rates in my display settings or NCP. I'm using 1.4.2 with the 388.13 drivers with CRU 1.3.1/NCP and the only thing strikes me as weird is I'm only getting 3 limits when running the patcher... DL-DVI, SL-DVI/HDMI and SL-DVI limit on DL-DVI. I even tried the "full" version and it didn't help. I got more limits but it still didn't work with the full exe. When using the patcher for AMD, there was at least twice as many limits to patch. I've tried 3 different drivers and even rolled back to 1.4.1 with the 387.92 drivers and same issue. Just doesn't work.
Any advice would be appreciated.
(11-10-2017 07:01 PM)seizethecarp Wrote: [ -> ]Been using these overclock tools for years with AMD cards and never had an issue. Yesterday I just upgraded to a Nvidia 1070 and everything seems to work as normal except I'm not getting the refresh rates in my display settings or NCP. I'm using 1.4.2 with the 388.13 drivers with CRU 1.3.1/NCP and the only thing strikes me as weird is I'm only getting 3 limits when running the patcher... DL-DVI, SL-DVI/HDMI and SL-DVI limit on DL-DVI. I even tried the "full" version and it didn't help. I got more limits but it still didn't work with the full exe. When using the patcher for AMD, there was at least twice as many limits to patch. I've tried 3 different drivers and even rolled back to 1.4.1 with the 387.92 drivers and same issue. Just doesn't work.
You need to be more specific about what you're trying to do. What monitor do you have? What resolutions and refresh rates are you trying to add? Are you using DVI? HDMI? Any adapters?
The number of limits isn't a problem. NVIDIA's driver doesn't have as many limits. Chances are you only need one of them.
Thanks Toasty for the reply. I was able to get it to work through NCP. Strange that CRU wasn't doing the trick. For posterity I am using a 27" QNIX on a DL-DVI and no adapters.