Monitor Tests Forum

plz fix update, overckloking monitor - not working / gtx 1060, 397.31

Try this: https://www.monitortests.com/nvlddmkm-patcher-1.4.3.zip

I don't know if the 400 MHz SLI limit still exists with 600/700-series GPUs. I don't see it anywhere, and 397.31 no longer supports 400/500-series GPUs, so the full patcher does not support 397.31. I've updated the regular patcher to find the SL-DVI limit on DL-DVI with 397.31, but I don't even have a new enough card to test it.

If you find this software useful, please consider supporting me through Patreon:

send ,e update driver, i check him in my 680
thx!

(05-01-2018 01:58 PM)spekt_e_r Wrote: [ -> ]send ,e update driver, i check him in my 680
thx!

What?

I tested 1.4.3 on my 1060 using the 397.31 driver and I can confirm it is indeed working on my end, I was able to overclock my monitor to 74hz as usual.

Weird thing is when I tried setting the new refresh rate from NVCP, my monitor black screen'd and I had to hard reset, so I thought "damn this ain't gonna work". But somehow, when I booted back in, my monitor was indeed running at 74hz for some reason, weird, but works regardless.

Thanks!

(04-26-2018 05:42 PM)gran172 Wrote: [ -> ]Nvidia's patcher doesn't work any longer with Nvidia's latest driver (397.31), I get "SL DVI limit on DL-DVI: Not found", can anyone confirm?

(04-30-2018 03:45 PM)ToastyX Wrote: [ -> ]Try this: https://www.monitortests.com/nvlddmkm-patcher-1.4.3.zip

I don't know if the 400 MHz SLI limit still exists with 600/700-series GPUs. I don't see it anywhere, and 397.31 no longer supports 400/500-series GPUs, so the full patcher does not support 397.31. I've updated the regular patcher to find the SL-DVI limit on DL-DVI with 397.31, but I don't even have a new enough card to test it.

If you find this software useful, please consider supporting me through Patreon:

Thank you very much! Now it's all working again, I was using the 391 driver until now, just tested and everything looks good again.

Nvidia released 397.55 which is a hotfix for 397.31, I can confirm 1.4.3 is still working on this driver.

Hey all! I used to use this for my EVGA 670GTX without a hitch, although I'm not sure if it made much of a difference. I'm able to overclock to 75hz without additional third party programs, although regardless of using the tool or not, I can't go above 76hz, but was wondering if it's worthwhile to use with my ASUS STRiX 1080GTX?

Also, are there any other tools to use? Currently I have:

- NVIDIA: CRU, Pixel Clock Patcher, PowerMizer and Profile Inspector.

Thank you!

NVidia has got a new driver since a month ago and the 1.4.3 patcher doesn't work with the new 398.36. Please update!

(07-26-2018 03:34 PM)darkySp Wrote: [ -> ]NVidia has got a new driver since a month ago and the 1.4.3 patcher doesn't work with the new 398.36. Please update!

Describe what you mean by "doesn't work." I don't see any new changes in 398.36.