Post Reply
Custom Resolution Utility (CRU)
06-04-2016, 06:20 PM
Post: #2101
RE: Custom Resolution Utility (CRU)
(06-02-2016 07:23 AM)cide Wrote:  so what is better the right or left i dont see any difference but i want to be sure what is best timing for the pixel plz help me what is the better
i don't inderstand front porch back porch , the left is automatic timing for 1079p and at right is original 1080p timing with just 1 line vertical less 1125-1124
It doesn't matter. The timing parameters don't affect the image quality. If you want exactly 60 Hz, leave the vertical total at 1125 and just change 1080 to 1079. You don't need to change anything else.


(06-02-2016 08:09 PM)cide Wrote:  in cru with native automatic its like at the left image , but its normal im loose pixel horizontal just to change 1080p to 1079p? the front and back porsh is more low too
for why just for one line 1080p to 1079p the front , back porsh and total pixel horizontal change?
CRU uses the CEA standard for TV resolutions and CVT-RB for everything else. That's why the timing parameters change with 1920x1079. Just use the 1920x1080 timing parameters and change the resolution manually.
Find all posts by this user
Quote this message in a reply
06-04-2016, 06:21 PM
Post: #2102
RE: Custom Resolution Utility (CRU)
(05-30-2016 11:09 AM)ashlar Wrote:  Hi Toasty, is there any way we can have two different custom resolutions for 23.97602 and 24.000 on Nvidia? I tried by placing both in Extended, one in extended and one in detailed (main screen) but it's either one or the other. Is this how it's supposed to be? Because with regular drivers you do have two different resolutions saved.
Windows doesn't have a way to list both.
Find all posts by this user
Quote this message in a reply
06-05-2016, 09:38 AM
Post: #2103
RE: Custom Resolution Utility (CRU)
(06-04-2016 06:21 PM)ToastyX Wrote:  
(05-30-2016 11:09 AM)ashlar Wrote:  Hi Toasty, is there any way we can have two different custom resolutions for 23.97602 and 24.000 on Nvidia? I tried by placing both in Extended, one in extended and one in detailed (main screen) but it's either one or the other. Is this how it's supposed to be? Because with regular drivers you do have two different resolutions saved.
Windows doesn't have a way to list both.
I'm afraid I don't understand. In Windows, with regular drivers, I have both 23 and 24 in the list. And they both exist independently. madVR is capable of selecting one or the other. At least, this is how I remember it before installing and using CRU. Am I remembering wrong?
Find all posts by this user
Quote this message in a reply
06-05-2016, 10:55 AM
Post: #2104
RE: Custom Resolution Utility (CRU)
Quote:Windows doesn't have a way to list both.
No.
I have AMD Crimson driver 16.5.3 which has the ability to create custom resolutions. In the category "base mode" I have to enter horizontal/vertical resolution, refresh rate, interlaced/progressiv and timing standard. In the category detailed timings I can enter the porches.
The interesting thing is: You can enter what you want at "refresh rate" and this naming is then taken by Windows.
I can e.g. create 2 custom resolutions 47.952Hz and 48.000Hz (in my setup they are actually a little bit smaller so the 48.000Hz becomes a 47.999xxxxHz refresh rate) and call them "47" and "48". In Windows they appear now with these names in the listing of supported resolutions. ThereĀ“s no plausibility check, if I want, I can call them "46" and "41".
Find all posts by this user
Quote this message in a reply
06-06-2016, 08:30 AM
Post: #2105
RE: Custom Resolution Utility (CRU)
(06-04-2016 06:17 PM)ToastyX Wrote:  
(05-31-2016 11:22 PM)somebody2978 Wrote:  It seemed CRU like a good tool, but I had to stop using it, it has side effects. When my PC return from a sleep or hibernation, my LG monitor never turns on Huh, and need reboot.
When I make resolutions from the panel nvidia, no problems Undecided.
That shouldn't happen unless there's a driver bug. Did you choose "Custom extension block"? Don't use "No extension block" with NVIDIA. What monitor do you have? If you're using HDMI, make sure to add an HDMI support data block in the custom extension block. The defaults should be fine.
The nVIDIA drivers works fine. I tried with several drivers and the result is always same: black screen (monitor no receives signal from VGA) after sleep or hibernation.
I am using "Custom extension block" slots, but "Detailed resolutions" slots too. All with custom parameter cloning CVT-RB values from nVIDIA driver to each resolution.
My LG 22MP55D monitor interface is DVI-D (single). Although I not tried "HDMI Support" in Data blocks. It is strictly necessary to DVI-D?
Find all posts by this user
Quote this message in a reply
06-09-2016, 08:33 AM (Last edited: 06-10-2016, 10:51 AM by BLUuuE)
Post: #2106
RE: Custom Resolution Utility (CRU)
Hi, I can't seem to get 75Hz to be shown in testufo.com. However, when I enable VSync in games (osu!, CS:GO) the fps gets locked at 75, as expected. [Image: http://puu.sh/pmh6b/99626418d7.png]
Is this because my timings are too low? Is there a limit to how low the timings can go? Sometimes, when I set the timings too low, it won't show up in Windows. When that happens does that mean that that's the lowest my monitor can do?

Monitor: LG E2441V-BN
Cable: Dual link DVI
GPU: Sapphire HD7850

Thanks

edit: Turns out I have single link DVI. I found a HDMI cable, but looks like my monitor can't go past 165MHz on the pixel clock. Sad
edit 2: Maybe my HDMI cable isn't a high speed one... so maybe that's why it can't go over 165MHz?
edit 3: Sometimes I get coloured horizontal lines when watching videos. [Image: http://puu.sh/pnzmk/167129782a.jpg]
I used to get the same thing on single link DVI, so maybe it's my monitor?
Find all posts by this user
Quote this message in a reply
06-09-2016, 07:56 PM
Post: #2107
RE: Custom Resolution Utility (CRU)
I just sold my AMD card and picked up a GTX 1080 and I am having the washed out color issue, on only 1 of my 3 monitors. In the NCP, I do not have the option to change the RGB spectrum to full. It doesn't even give me the option (it does on the other monitors). Setting a custom resolution in NCP doesn't stick either. I apply it, and the next time I go back in, its back to the "native" resolution.

Can anyone help me solve this?
Find all posts by this user
Quote this message in a reply
06-13-2016, 02:39 AM (Last edited: 06-13-2016, 02:40 AM by drummer4christ81)
Post: #2108
RE: Custom Resolution Utility (CRU)
When I set my Laptop from 1600 x 1200 (6:10) to 1600 x 1080 (6:9) my screen looks like this.

https://www.dropbox.com/s/tuvpa6t8op9b16...n.jpg?dl=0

What am I doing wrong?


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
06-13-2016, 06:03 AM
Post: #2109
RE: Custom Resolution Utility (CRU)
(06-13-2016 02:39 AM)drummer4christ81 Wrote:  When I set my Laptop from 1600 x 1200 (6:10) to 1600 x 1080 (6:9) my screen looks like this.

https://www.dropbox.com/s/tuvpa6t8op9b16...n.jpg?dl=0

What am I doing wrong?
1600 x 1200 is 4:3
1600 x 1080 some weird aspect ratio

1600 x 900 is 16:9
Find all posts by this user
Quote this message in a reply
06-14-2016, 02:37 AM
Post: #2110
RE: Custom Resolution Utility (CRU)
(06-13-2016 06:03 AM)BLUuuE Wrote:  1600 x 1200 is 4:3
1600 x 1080 some weird aspect ratio

1600 x 900 is 16:9

I meant 1920 x 1080
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 74 Guest(s)