Post Reply
Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
07-09-2015, 04:14 PM (Last edited: 07-09-2015, 04:20 PM by BxBender)
Post: #751
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
Hi ho.

Since i am using Windows 10 the strobelight tool doesn not show me 120hz in the browser ufo test (firefox). Windows 8.1 showed it correct.

I am using AMD 7950 with CCC 15.7 WHQL (15.2 was the same problem) on my BenQ 2720T.

Is this a browser problem, or does the tool not use 120hz anymore?

The CCC says i am using 120hz and the green light is on (3D mode).

And i think that i can see moving text on the windows desktop a little bit better than with 60hz activated.

Any ideas or info?

EDIT:
I have a positive info for you: after 2 years using this tool, under Windows 10 the tool switch strobelight on/off works the first time correct. Yeah :-))
Find all posts by this user
Quote this message in a reply
07-11-2015, 11:27 PM
Post: #752
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(07-09-2015 04:14 PM)BxBender Wrote:  Since i am using Windows 10 the strobelight tool doesn not show me 120hz in the browser ufo test (firefox). Windows 8.1 showed it correct.

I am using AMD 7950 with CCC 15.7 WHQL (15.2 was the same problem) on my BenQ 2720T.

Is this a browser problem, or does the tool not use 120hz anymore?
That would be a browser problem. Try it with Chrome.

(07-09-2015 04:14 PM)BxBender Wrote:  The CCC says i am using 120hz and the green light is on (3D mode).
If Windows and CCC report 120 Hz and 3D mode is active on the monitor, then it's working.
Find all posts by this user
Quote this message in a reply
07-24-2015, 02:44 AM
Post: #753
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
Since upgrading Catalyst to 15.7 Strobelight doesn't seem to work. It'll show a check mark next to "Strobing on" but I can't change the brightness. Also the tests are blurry.
Anyone else have this issue? I haven't seen anyone else complaining.
My monitor is an Asus VG248 and I'm running Windows 7 64 bit.
Find all posts by this user
Quote this message in a reply
07-24-2015, 11:00 AM
Post: #754
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(07-24-2015 02:44 AM)bminton3 Wrote:  Since upgrading Catalyst to 15.7 Strobelight doesn't seem to work. It'll show a check mark next to "Strobing on" but I can't change the brightness. Also the tests are blurry.
Anyone else have this issue? I haven't seen anyone else complaining.
My monitor is an Asus VG248 and I'm running Windows 7 64 bit.

Try removing, using display driver uninstaller (DDU), run reset-all.exe In the ToastyX Custom resolution utility program package, then reinstall the driver, then re-do strobelight setup.

Make sure Virtual super sampling is disabled.
Find all posts by this user
Quote this message in a reply
07-24-2015, 03:13 PM
Post: #755
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(07-24-2015 02:44 AM)bminton3 Wrote:  Since upgrading Catalyst to 15.7 Strobelight doesn't seem to work. It'll show a check mark next to "Strobing on" but I can't change the brightness. Also the tests are blurry.
Anyone else have this issue? I haven't seen anyone else complaining.
My monitor is an Asus VG248 and I'm running Windows 7 64 bit.
It sounds like you need to reinstall the refresh rates. That can happen sometimes after a driver update.
Find all posts by this user
Quote this message in a reply
07-24-2015, 03:15 PM
Post: #756
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(07-24-2015 11:00 AM)falkentyne Wrote:  Try removing, using display driver uninstaller (DDU), run reset-all.exe In the ToastyX Custom resolution utility program package, then reinstall the driver, then re-do strobelight setup.
There's no need to run reset-all.exe after using DDU. DDU already removes all the monitors, so there would be nothing to reset.

(07-24-2015 11:00 AM)falkentyne Wrote:  Make sure Virtual super sampling is disabled.
VSR wouldn't affect Strobelight. They can be used together.
Find all posts by this user
Quote this message in a reply
07-24-2015, 11:28 PM
Post: #757
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(07-24-2015 03:13 PM)ToastyX Wrote:  
(07-24-2015 02:44 AM)bminton3 Wrote:  Since upgrading Catalyst to 15.7 Strobelight doesn't seem to work. It'll show a check mark next to "Strobing on" but I can't change the brightness. Also the tests are blurry.
Anyone else have this issue? I haven't seen anyone else complaining.
My monitor is an Asus VG248 and I'm running Windows 7 64 bit.
It sounds like you need to reinstall the refresh rates. That can happen sometimes after a driver update.

Thanks! I just had to run strobelight-setup.exe and reboot my computer. I love being able to read the street map at 120hz.
Find all posts by this user
Quote this message in a reply
07-25-2015, 03:07 AM
Post: #758
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(07-24-2015 11:28 PM)bminton3 Wrote:  
(07-24-2015 03:13 PM)ToastyX Wrote:  
(07-24-2015 02:44 AM)bminton3 Wrote:  Since upgrading Catalyst to 15.7 Strobelight doesn't seem to work. It'll show a check mark next to "Strobing on" but I can't change the brightness. Also the tests are blurry.
Anyone else have this issue? I haven't seen anyone else complaining.
My monitor is an Asus VG248 and I'm running Windows 7 64 bit.
It sounds like you need to reinstall the refresh rates. That can happen sometimes after a driver update.

Thanks! I just had to run strobelight-setup.exe and reboot my computer. I love being able to read the street map at 120hz.

Now try the real man test.
Pixperan readability test at tempo 30!

(pixperan doesn't seem to work in windows 8 at all, it runs at 30 fps or something awful).

I can pass the pixperan speed reading test at tempo 30 at 100hz refresh rate but not at 120hz...the scrolling speed seems to be tied to the refresh rate.
Find all posts by this user
Quote this message in a reply
08-04-2015, 03:00 PM (Last edited: 08-04-2015, 03:07 PM by CalvesSlayer)
Post: #759
Big Grin RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
After installing Windows 10, the Strobelight utility doesn't seem to want to work. I suppose functionality for Win10 isn't there quite yet... either that, or it has to do with Catalyst Control Center. I upgraded to 15.7.1 right after updating windows.
Find all posts by this user
Quote this message in a reply
08-04-2015, 04:49 PM
Post: #760
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(08-04-2015 03:00 PM)CalvesSlayer Wrote:  After installing Windows 10, the Strobelight utility doesn't seem to want to work. I suppose functionality for Win10 isn't there quite yet... either that, or it has to do with Catalyst Control Center. I upgraded to 15.7.1 right after updating windows.
I'm not seeing any issues with Windows 10 and Catalyst 15.7.1. You didn't describe what isn't working. Did you reinstall the refresh rates and restart?
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 4 Guest(s)