Post Reply
Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
11-17-2016, 12:56 AM
Post: #871
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
Any chance of strobelight working at 144Hz or above?
Find all posts by this user
Quote this message in a reply
11-17-2016, 07:09 AM
Post: #872
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(11-17-2016 12:56 AM)saywhat Wrote:  Any chance of strobelight working at 144Hz or above?
No, that's a monitor limitation.
Find all posts by this user
Quote this message in a reply
01-01-2017, 01:16 AM
Post: #873
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
Happy new year!
Is there any chance to use it on Benq Zowie XL2430 (win10, DisplayPort, 376.33 Nvidia GTX680)? After reboot strobelight.exe just shows increasing numbers and does not apply to any icon (taskbar) as intended.
Find all posts by this user
Quote this message in a reply
01-02-2017, 09:08 AM
Post: #874
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
Any news if there's a way to get Strobelight working on Nvidia surround without doing the hardware mod?
Find all posts by this user
Quote this message in a reply
01-04-2017, 10:20 AM
Post: #875
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(01-02-2017 09:08 AM)PedroGomes Wrote:  Any news if there's a way to get Strobelight working on Nvidia surround without doing the hardware mod?
Is Surround still not working with the latest driver? I don't have a way to test it myself. The refresh rates need to be installed with Surround disabled. Then reboot and set up Surround.
Find all posts by this user
Quote this message in a reply
01-04-2017, 10:21 AM
Post: #876
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(01-01-2017 01:16 AM)Podranok Wrote:  Is there any chance to use it on Benq Zowie XL2430 (win10, DisplayPort, 376.33 Nvidia GTX680)? After reboot strobelight.exe just shows increasing numbers and does not apply to any icon (taskbar) as intended.
Strobelight can't unlock newer monitors, but since you have an NVIDIA card, you can unlock LightBoost using method #3: http://www.blurbusters.com/zero-motion-blur/lightboost/
Find all posts by this user
Quote this message in a reply
01-05-2017, 12:40 PM (Last edited: 01-06-2017, 05:44 AM by Podranok)
Post: #877
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(01-04-2017 10:21 AM)ToastyX Wrote:  
(01-01-2017 01:16 AM)Podranok Wrote:  Is there any chance to use it on Benq Zowie XL2430 (win10, DisplayPort, 376.33 Nvidia GTX680)? After reboot strobelight.exe just shows increasing numbers and does not apply to any icon (taskbar) as intended.
Strobelight can't unlock newer monitors, but since you have an NVIDIA card, you can unlock LightBoost using method #3: http://www.blurbusters.com/zero-motion-blur/lightboost/
Yeah i did it with 3rd method. Thanks!
Few questions please!
1) Does Nvidia 3D depth change how the strobelight works? By default it's on 15%. Should i downgrade it to 10% like in this example? [Image: http://www.blurbusters.com/wp-content/uploads/2013/06/motion-blur-graph.png]
2) Should i change total pixels to 2080 x 1500 and why? Costom Resolution Utility comes with default 2080 x 1149 pixels.
3) What is sync polarity for? Default value is +\+ but some example configues are +\-
Find all posts by this user
Quote this message in a reply
01-06-2017, 10:36 PM
Post: #878
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(01-05-2017 12:40 PM)Podranok Wrote:  1) Does Nvidia 3D depth change how the strobelight works? By default it's on 15%. Should i downgrade it to 10% like in this example? [Image: http://www.blurbusters.com/wp-content/uploads/2013/06/motion-blur-graph.png]
That's meant for stereoscopic 3D. You should disable stereoscopic 3D if you're not using 3D glasses. The graph is talking about the LightBoost brightness setting, not 3D depth.

(01-05-2017 12:40 PM)Podranok Wrote:  2) Should i change total pixels to 2080 x 1500 and why? Costom Resolution Utility comes with default 2080 x 1149 pixels.
You shouldn't change the totals if you're using LightBoost because it requires specific totals to activate. The vertical total trick is meant for improving the non-LightBoost backlight strobing option that some BenQ monitors have. If your monitor has the blur reduction feature, you can try that instead of LightBoost.

(01-05-2017 12:40 PM)Podranok Wrote:  3) What is sync polarity for? Default value is +\+ but some example configues are +\-
It's not important. It's just whether the sync pulse goes up or down, but monitors generally don't care either way.
Find all posts by this user
Quote this message in a reply
01-07-2017, 09:42 PM
Post: #879
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
But... can i use both Lightboost and Benq Blur Reduction at the same time? It seems i use them both now as the guide methor 3 says. And if i uncheck "Enable stereoscopic 3D" button Lightboost turnes off. I'm kinda confused.
Find all posts by this user
Quote this message in a reply
01-10-2017, 03:17 PM
Post: #880
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(01-07-2017 09:42 PM)Podranok Wrote:  But... can i use both Lightboost and Benq Blur Reduction at the same time? It seems i use them both now as the guide methor 3 says. And if i uncheck "Enable stereoscopic 3D" button Lightboost turnes off. I'm kinda confused.
LightBoost and BenQ's blur reduction are both forms of backlight strobing, so it doesn't make sense to use them both at the same time. Disabling stereoscopic 3D shouldn't disable LightBoost. The point of that guide is to use the wizard to unlock LightBoost in the monitor. Then you can use Strobelight or CRU to enable LightBoost using custom resolutions. That was the point of using CRU in the guide. LightBoost should be active when any of the custom resolutions are active. You can also use Strobelight now that LightBoost is unlocked. Strobelight normally takes care of the unlocking part, but it can't do that for newer monitors.
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 4 Guest(s)