Custom Resolution Utility (CRU)
|
09-05-2021, 11:39 AM
(Last edited: 09-05-2021, 11:40 AM by moutarde)
Post: #6053
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(09-04-2021 09:45 PM)ToastyX Wrote:(09-04-2021 03:48 PM)moutarde Wrote: I don't know if this has been already dealt with, but I didn't find this exact issue while googling. Using CRU on an intel cpu+igpu laptop (UHD 620) to create custom resolution works fine for 48hz for me. However, when I try to create 47.952hz to watch 23.976fps movies, it just shows up as 48p (just like 48hz) in intel graphics center and is in fact really a 48hz setting (can see with mpc hc and madvr). I have tried to disable the 48hz custom resolution, keeping only the 47.952hz one, but it acts the same. I have also tried different timing presets (automatic pc, exact) but none of them helped.Windows will list both as 48 Hz, so you can't have both at the same time, but there should be no issues with fractional refresh rates. Try rebooting instead of restarting the driver to make sure it's applying correctly, and try using this with Chrome to check: https://www.displayhz.com/ I tried everything you said and no matter what, displayhz.com shows ~47.999-48.001hz. I also updated intel drivers and the result is the same. Using 55.1hz custom setting shows up as 55p as expected but works fine at 55.1hz according to displayhz.com. Also, I tried to use 23.976hz and 71.928hz to try to get away from this buggy setting but it just breaks my monitor. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 104 Guest(s)