Custom Resolution Utility (CRU)

[drunkonredwine]

I have an LG L227WT 1680 x 1050 monitor.

Using CRU I have set the max refresh of my monitor which is 75Hz. Windows 8.1 was detecting it as 60Hz and showing it as a Generic PNP monitor in Device Manager.

To get this to work I had to place the detailed resolution entries under all monitor profiles not just the active.

75Hz seems to work however the screen has shifted about 8mm downwards, and therefore the taskbar at the bottom of the screen is cut-off and I have a black bar at the top. Horizontal looks to be correct.

The question is, is there a way to shift the image upwards without messing things up? The monitor buttons themselves do not allow me to move / change this, nor does AMD's Catalyst.

The program is great, I discovered it on a forum that identified this utility as useful for Titanfall. This game locks the FPS to your LCD refresh rate. Thus this utility comes in to its own.

Further info, (if it helps)

Monitor specs are as follows : -

Vertical frequency [Hz]: 56 - 75
Max. horizontal frequency/ video bandwidth [kHz/MHz]: 30 - 83

Using a AMD R9 270 with the latest Catalyst driver, 14.4, using DVI-D