MAG274QRF-QD, 2560x1440@144Hz via DP and 10bpc@>120Hz...
|
09-24-2021, 09:35 PM
(Last edited: 09-25-2021, 07:24 AM by dmab)
Post: #1
|
|||
|
|||
MAG274QRF-QD, 2560x1440@144Hz via DP and 10bpc@>120Hz...
First of all, thank you for such useful and free utilities.
There is a monitor "MSI Optix MAG274QRF-QD", firmware FW.016, connected via DisplayPort (1.2a). First question. 2560x1440@144Hz 8bpc DP ? As seen from the table https://download.msi.com/archive/mnu_exe...df#page=19 the monitor has a 2560x1440@144Hz 8bpc mode for HDMI, but does not have one for DP / Type-C. Questions: why is this? and how to add this mode correctly using CRU? By the way, you can use the online calculator for timings https://tomverbeure.github.io/video_timings_calculator Second question. 2560x1440@144Hz(165Hz) 10bpc DP ? This monitor supports 10bpc color, but only at 120Hz or less. Is it possible with the help of CRU (or otherwise) to increase the frequency for 10bpc color? Maybe, for example, using CRU, you can remove all sound data blocks from the characteristics of the modes and thus turn on 10bpc color in modes with a frequency of more than 120Hz? By the way, according to https://en.wikipedia.org/wiki/DisplayPor...f-DSC_72-0 mode 2560x1440@144Hz 10bpc DP/Type-C does not fit into the bandwidth of the interface (HBR2 for DP1.2) if everything is done according to the CVT-R2 standard, but if you manually set the timings, then you can fit in and this mode should work. Thanks. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
MAG274QRF-QD, 2560x1440@144Hz via DP and 10bpc@>120Hz... - dmab - 09-24-2021 09:35 PM
RE: MAG274QRF-QD, 2560x1440@144Hz via DP and 10bpc@>120Hz... - dmab - 09-25-2021, 01:11 PM
RE: MAG274QRF-QD, 2560x1440@144Hz via DP and 10bpc@>120Hz... - ToastyX - 09-25-2021, 02:00 PM
RE: MAG274QRF-QD, 2560x1440@144Hz via DP and 10bpc@>120Hz... - dmab - 09-25-2021, 02:39 PM
RE: MAG274QRF-QD, 2560x1440@144Hz via DP and 10bpc@>120Hz... - ToastyX - 09-27-2021, 03:25 AM
|
User(s) browsing this thread: 1 Guest(s)