AMD/ATI Pixel Clock Patcher

[ToastyX]

(08-11-2013 01:53 PM)MS-DOS Wrote:  ...his monitor did care about that small thing in EDID, that allowed to past the limit. So, my previous question remains. It's not that hard to try anyway, I just don't know how to edit EDID directly.

That has nothing to do with the monitor. Changing the EDID won't get around monitor limits.

http://www.entechtaiwan.com/util/moninfo.shtm

Turn off read-only mode in the edit menu. Then change byte 0x14. The input signal information should change on the right.

Then create an INF file and install it using the device manager.