Strobelight - LightBoost Utility for AMD/ATI and NVIDIA

[ToastyX]

(10-11-2019 03:34 AM)SmoothMotion Wrote:  I purchased a DisplayPort to DVI adaptor and the monitor (VG27HE) seems to function at 144hz with the cable and adaptor but when I activate a strobed refresh rate (100hz), it works and shows “3D mode” on the monitor menu but the image is stretched so I can only see the left side of the image with the right half of the image off screen.

That means the adapter is single-link. The monitor will not display a strobed resolution correctly without dual-link DVI.

You would need one of those expensive active DisplayPort to dual-link DVI converters with USB for power, but I wouldn't recommend it because you won't be able to unlock LightBoost with the adapter if the monitor loses power, but you could use an HDMI-DVI cable to unlock LightBoost if that happens. It'd be better to get a card with dual-link DVI, or get a newer monitor with strobing capability.