NVIDIA Pixel Clock Patcher

[ToastyX]

NVIDIA Pixel Clock Patcher modifies the NVIDIA video driver to allow higher resolutions and refresh rates by removing the 165 MHz pixel clock limit for single-link DVI and HDMI, the 330 MHz limit for dual-link DVI, and the 400 MHz limit for SLI and 400/500-series GPUs.

Download: nvlddmkm-patcher-1.4.16.zip - Source: nvlddmkm-patcher-1.4.16-src.zip

A message from ToastyX:

Over the years, I have created various monitor-related software and provided support for free. I would like to continue providing updates and work on new ideas, but I need your support. If you find my software useful, please consider supporting me through Patreon:

Requirements:

• Windows Vista or later
• 400-series GPU or newer
  

Compatibility:

• Version 1.4.16 is compatible with 304.48 to 522.25. It can be used with future versions if it finds the limits you need.
• Riot Vanguard and FACEIT Anti-Cheat will not allow patched drivers to load.
  

Getting started:

1. Run nvlddmkm-patcher.exe. (Catleap/QNIX/Tempest/X-Star users with 400/500-series GPUs: run nvlddmkm-patcher-full.exe instead.)
2. If all limits are found, click "Yes" to patch and sign. If a limit is not found or if multiple matches are found, the patcher needs to be updated.
3. Reboot.
   

You can then add higher refresh rates using the NVIDIA Control Panel or Custom Resolution Utility (CRU).

To restore the unpatched driver, run the patcher again and click "Yes" to restore from backup.

Unpatching is not required before upgrading drivers. Simply run the patcher again after installing the new driver.

Options:

You can rename the .exe file to change certain options:

• nvlddmkm-patcher-sl.exe - Make dual-link DVI ports act as single-link DVI. Use this to go beyond 230 MHz pixel clock with single-link DVI monitors.
• nvlddmkm-patcher-dl.exe - Do not patch single-link DVI limit on dual-link DVI ports. Useful for 2560x1080 monitors.
• nvlddmkm-patcher-self.exe - Use self-signed certificate. Windows test mode is required: https://www.monitortests.com/testmode.zip
  

Known issues:

• The full patch may break HDCP support. It is only needed if the pixel clock is greater than 400 MHz with 400/500-series GPUs or SLI with 600/700-series GPUs until 391.35.
• NVIDIA cards will not reduce clock speeds when idle if the vertical blanking/total is too low.
• 400/500-series cards will not reduce clock speeds if the pixel clock is greater than 404 MHz.
  

Recent changes:

• 1.4.16: Added self-sign option and Info.txt. No changes to current drivers.
• 1.4.15: Updated for 516.40.
• 1.4.14: Updated for 471.11 and 471.41. Fixed SL-DVI/HDMI limit.
• 1.4.13: Updated for 456.38, and fixed DL-DVI issues with RTX 2000-series GPUs.
• 1.4.12: Fixed CUDA/PhysX issues with newer drivers.
• 1.4.11: Updated for 451.67. Fixed TMDS limit.
• 1.4.10: Found another TMDS limit for 451.48.
• 1.4.9: Updated for 451.48.
• 1.4.8: Updated for 440.97. Fixed TMDS limit.
• 1.4.7: Updated for 435.27.
• 1.4.6: Updated for 430.39. Fixed SL-DVI limit on DL-DVI and HDMI-DVI limit.
• 1.4.5: Find new HDMI-DVI limit.
• 1.4.4: Updated for 416.34. Find new TMDS limit.
• 1.4.3: Updated for 397.31.
• 1.4.2: Updated for 388.10/388.13.
• 1.4.1: Updated for 384.76. Fixed SL-DVI limit on DL-DVI.
• 1.4.0: Keep old backup when updating files already patched by an older version. This does not affect new installations. Repatching is not necessary.
• 1.4: Updated for 369.09/372.54. Changed the way the driver is located and patched.
• 1.3.7: Updated for 368.22/368.25. Fixed SL-DVI limit on DL-DVI for 64-bit.
• 1.3.6: Updated for 364.47. Fixed SL-DVI limit on DL-DVI for 64-bit.
• 1.3.5: Updated for 361.43. Fixed SL-DVI limit on DL-DVI and Fermi check for 64-bit.
• 1.3.4: Updated for 358.50. Fixed Fermi check for 32-bit. Try to improve finding Fermi check for newer drivers.
• 1.3.3: Added support for Windows 10 WDDM 2.0 drivers.
• 1.3.2: Updated for 350.12. Increased SL-DVI/HDMI limit.
• 1.3.1: Updated for 347.09.
• 1.3: Remove "SLI limit 2" text for newer drivers. Fall back to self-signing if signing fails.
• 1.2.6: Updated for 337.50. Fixed SL-DVI/HDMI limit for 64-bit. Fixed SLI limits for 32-bit.
• 1.2.5: Updated for 334.67. Fixed SLI limit.
• 1.2.4: Fixed restore from backup for 32-bit (64-bit not affected).
• 1.2.3: New SLI limit found.
• 1.2.2: Removed SL-DVI/HDMI check false positive for 64-bit.
• 1.2.1: Updated for 331.40. Fixed SLI limit.
• 1.2: Test mode no longer required.