EDID help please

[ToastyX]

(01-19-2019 07:56 PM)shambles Wrote:  I have tried to edit the EDID data. using hex editor and moninfo..
When i open the inf or bin file with monifo it does show that there are hdmi outputs available in the inf file. But after installing it and checking moninfo "registry active" there are no hdmi options available there...

MonInfo doesn't read extension blocks from the registry. Use CRU to check what's installed.

(01-19-2019 07:56 PM)shambles Wrote:  The hdmi connection is coming from my igpu on the intel i7 2600. i am running windows 10. My main display is connected to a gtx 970.

this is how i want it set up if at all possible. I am not certain that the windows 7 i7 2600 drivers support edid override (there are no windows 10 drivers for sandy bridge or older) But having said that i am able to override resolutions and refresh rates.

The graphics driver for the i7-2600 doesn't support EDID overrides using the .inf file/CRU method. Either use the GTX 970, or try using this method: https://www.codeground.net/howto/overrid...-registry/