Post Reply
Overclocking to higher than 1440p60
06-28-2020, 01:26 AM
Post: #7
RE: Overclocking to higher than 1440p60
(06-28-2020 12:47 AM)Ecampos0511 Wrote:  Im running through a similar issue. First time CRU user and I'm sure I'll trying to grasp everything in the custom res. I'm trying to make my Console that is similar to a crate , the number 1 and the 3rd from last letter of the alphabet . My laptop is really old and the drivers are old , but I was able to get the overclocking to display 1920x1080 at 95Hz. I'm trying to get it forced to a native ( at least) 120 Hz so that the console can AUTOMATICALLY give me the resolution at 120 hz . Not console forced to HDMI and take the 120. I was able to overclock this to a buddy's laptop with. Gtx1060, I think , to 144hz refresh rate. Would love be to hear what I'm doing wrong and this post is very close to it. I don't think it's a bandwidth issue since both the HDMI ports are 2.0 ( input and output) ... Tried overclocking the pixel clock to a decent 665Mhz , but no luck yet .
Your post makes no sense. I don't see what the laptop has to do with the console, and I don't see how this is a similar problem. 1920x1080 @ 120/144 Hz is nowhere near enough to run into the 655.35 MHz limit.
Find all posts by this user
Quote this message in a reply
 Post Reply


Messages In This Thread
RE: Overclocking to higher than 1440p60 - ToastyX - 06-28-2020 01:26 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)