Custom Resolution Utility (CRU)
|
10-09-2013, 07:18 PM
Post: #356
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(10-09-2013 12:56 PM)ToastyX Wrote: NCX used timing parameters that went over 165 MHz, which requires HDMI 1.3 support or the pixel clock patch. The patch has no effect on anything older than the 5000 series, and older cards don't fully support HDMI 1.3 either. There isn't a way to get past 165 MHz with your video card.I use a DVI to HDMI converter. And it is indeed detected as DVI. But I guess its a single link DVI converter or < HDMI 1.3 converter that is hardware limited to 165 or something? Quote:Does that happen with the "LCD reduced" timing option? There isn't much room for tweaking at 75 Hz, but you might be able to get 72 Hz working.Yes! Thank you! I managed to get 71.930hz (aiming for 71.928hz) working by leaving the vertical and tweaking the horizontal a bit: H: 1920 40 40 48 128 2048 V: 3 5 29 37 1117 Going to try the 75hz values you suggested. Exactly 165mhz Although 75hz its not that important. I'm mainly using this old rig for video anyway and when I got that last 1hz its finally smooth. Thanks again! |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 74 Guest(s)