|
Custom Resolution Utility (CRU)
|
|
10-29-2013, 11:08 PM
Post: #404
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(10-29-2013 10:24 PM)viking Wrote: For example, if I use CRU, do I select the active EXP0901- EP-HDMI-RX and import the INF file there?Yes. (10-29-2013 10:24 PM)viking Wrote: Will Windows then think that I always have the MEID08E - AE3000 connected and the NVIDIA settings will stick?If you use CRU, it won't change the ID or the name, but it will import the capabilities so it's like an identical device. That should allow the content type setting to appear in the NVIDIA control panel. If you install it using the device manager, it will override the ID and the name as well. The device manager process is a bit more complicated. If you're using Windows 8, you have to temporarily disable driver signature enforcement first. Then open the device manager -> right-click the monitor -> Update Driver Software... -> Browse my computer for driver software -> Let me pick from a list of device drivers on my computer -> Have Disk... -> Browse for the .inf file -> OK -> Next -> Install this driver software anyway. (10-29-2013 10:24 PM)viking Wrote: If I later need to revert back, do I run reset-all.exe?Yes, or you can use the "Delete" button at the top to delete the changes for individual displays. |
|||
|
|
« Next Oldest | Next Newest »
|