Custom Resolution Utility (CRU)

[Jen]

(08-15-2024 03:01 PM)ToastyX Wrote:  

(08-15-2024 01:02 PM)Jen Wrote:  Hello, so I got my new aw2725df, but when I try to use a custom resolution theres no hdmi signal despite the resolutions being within the hdmi 1.4 bandwith limit and intel gpu pixel clock limit (300.99 mhz)

I noticed that only the tv resolutions in the CTA-861 extension block work, but nothing else including detailed resolutions within the extension block. Also in case, the block also includes hdmi support (not 2.1 to be exact) with 340tmds limit.

That's up to the monitor. Just because the GPU can send it doesn't mean the monitor will handle it. What resolutions are you trying? The manual says it only supports 60/120 Hz at 1920x1080 and 60/120/144 Hz at 2560x1440 with HDMI. The monitor requires DisplayPort for higher refresh rates.

I was trying to add some wierd resolutions (all below 300.99mhz and 16:9)
1920x1080@138
1793x1008@158
1424x801@247

Since they don't seem to work at the moment, does that mean I'm stuck at 1920x1080@120, until I get a new pc?