Custom Resolution Utility (CRU)
|
08-02-2014, 06:55 PM
Post: #962
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(07-30-2014 08:13 AM)bones Wrote: Hello, I bought Benq GW2760 yesterday and tried to overclock it to 72Hz through Nvidia drivers and through CRU. Tried automatic, standard, reduced, but it won't work on 72Hz properly. I get a small amount of pixel-size artifacts. Best I could get was 70Hz on automatic. I applied your Nvidia driver tweak prior to overclocking. Do you have any custom timings I could try to get to the 72Hz?I don't know what timing parameters your monitor can handle. Try reducing the horizontal front porch and sync width to 8, and reduce the horizontal total to 1944. In CRU, it would look like this: H: 1920 8 8 8 24 1944 V: 1080 3 5 5 13 1093 If the monitor won't display that, try increasing the horizontal total to 1952. If it still won't display anything, then try increasing the horizontal sync width to 16. H: 1920 8 16 8 32 1952 V: 1080 3 5 5 13 1093 If it still won't display anything, try increasing the horizontal total to 1960. H: 1920 8 16 16 40 1960 V: 1080 3 5 5 13 1093 I would just keep increasing the horizontal values by 8 until I find the lowest values that the monitor will accept. If the monitor displays a picture but still has artifacts with reduced values, it might not be able to handle 72 Hz. You can also try increasing the vertical total just in case it can't handle 1093. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 106 Guest(s)