Custom Resolution Utility (CRU)

[ToastyX]

(10-09-2014 03:32 PM)Hulk Wrote:  Hi everyone, I have a Dell P1130 CRT monitor.

Using Custom Resolution Utility I was able to manually add the following resolutions:

1600 x 1200 @ 100Hz
1280 x 960 @ 120 Hz
1280 x 1024 @ 85 Hz
1920 x 1440 @ 75 Hz
2048 x 1536 @ 75 Hz

But how do I make the monitor display those resolutions? When I click the resolution and click on "OK" the resolution does not change. I am using a HD4600 GPU that is on my i5 4670k, I understand that it won't play games with a decent amount of fps on higher resolutions but I am just testing the resolutions out.

My motherboard is Asrock Extreme 4.
Also, it seems that I can't input refresh rates higher than 120, even if I lower the resolution, why is that?

CRU is not supported with Intel GPUs. Intel's driver didn't support EDID overrides in the past, but I don't know if that has changed.

Standard resolutions are limited to 60-123 Hz. Use detailed resolutions for higher refresh rates.

(10-09-2014 03:32 PM)Hulk Wrote:  I went to C:\Windows\System32 and clicked on the Intel application named CustomModeApp.exe and entered one of the resolutions above but none of them work. I now get the following message:

"The custom resolution exceeds the maximum bandwidth capacity".

How do I increase the bandwidth?

You can't unless someone makes a pixel clock patcher for Intel, but you shouldn't need that with VGA. The hardware might not support higher pixel clocks with VGA.