|
Custom Resolution Utility (CRU)
|
|
10-16-2014, 07:38 PM
(Last edited: 10-16-2014, 08:02 PM by Nazar)
Post: #1060
|
|||
|
|||
|
RE: Custom Resolution Utility (CRU)
After updating the AMD drivers from v13.12 to v14.9 the EDID Override somehow conflicts with the driver... When the tweaked monitor profile is used, then the "Use EDID or driver defaults" check box in Catalyst Center -> My VGA Displays -> Properties doesn't work anymore (when I try to switch it, it returns to the previous state), and it does not allow me set refresh rate higher than 60 Hz...
I'm running a Compaq p1210 CRT at 1600*1200@96Hz... I set up this and other resolutions (like 1280*960@119) via CRU and then I export it to the DAT file and create an INF profile with MonInfo... This profile can be used as a monitor driver and it used to work just excellent with AMD drivers 13.12 (it would switch automatically to my tweaked refresh rate when the resolution I tweaked was used), but with versions starting from 14 and up it is conflicting with the new drivers... When I use the tweaked monitor profile created with MonInfo, it sets the refresh rate to 60Hz when the PC is restarted... And no other refresh rates can be used... Can anything be done about it? Thank you in advance for any help... |
|||
|
|
« Next Oldest | Next Newest »
|