Custom Resolution Utility (CRU)
|
11-24-2014, 04:49 PM
Post: #1114
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(11-24-2014 03:35 PM)TurboJLo Wrote: Looking for some help with a Crossover 290M.Don't use the pixel clock patch with 2560x1080 monitors. 2560x1080 requires dual-link DVI, but the patch will make the video card send a single-link DVI signal at less than 230 MHz pixel clock. The patch is not needed with dual-link DVI unless you're trying to exceed 330 MHz pixel clock, which is not an issue at 2560x1080 unless you're trying to go beyond 100 Hz. If you're not using the patch and you can't get 2560x1080 @ 60 Hz to work with dual-link DVI, then the monitor is defective. If you have an AMD/ATI card older than the R9 290, keep in mind only one of the DVI ports is dual-link. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 74 Guest(s)