Custom Resolution Utility (CRU)
|
12-05-2014, 03:11 PM
(Last edited: 12-05-2014, 03:27 PM by Danja)
Post: #1136
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(12-05-2014 02:18 PM)ToastyX Wrote:(12-04-2014 03:59 PM)Danja Wrote: Hey chaps, I've had a good read about and don't seem to be able to find out what's going on. I've got an AOC G2460FQ - which is advertised as a 144hz monitor. My problem? From what I'm reading, scan lines or PWM sensitivity.This doesn't sound like a PWM problem. Most monitors are edge-lit, so PWM wouldn't produce lines or bars. PWM is also tied to the refresh rate on most monitors, so it should be less noticeable at higher refresh rates. Right I set both those options (I have two of the monitors, one on the DP, one on the DVI-D dual link) to one in my registry, and it's not made a difference unfortunately. HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000 was where I put them, that seems to be a pretty universal installation location for it, after checking google quickly. I'm literally flat out of ideas, if you have any other suggestion it would be very much appreciated (12-05-2014 03:09 PM)ToastyX Wrote:(12-05-2014 02:33 PM)Danja Wrote: The dithering sounds possible, I'll track down the reg values and report back, thanks for replyIt's usually under HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/CLASS/{4D36E968-E325-11CE-BFC1-08002BE10318}/#### Should have refreshed my page first. If I full screen the tests, 3 produces horizontal bars that float up teh screen at 120hz but not at 144, 5 looks really weird at 144hz fullscreen but I think its just my eyes, its like a small black bar will appear in it if i move my head further and closer quickly, 6A on head movement produces something similar to what I see in game, but a bit different, same for 6 b. The same thing happens on 120hz though in these tests, and I don't see that in game at this frequency. EDIT: Again, second though, when I keep the mouse and my head still, those lines aren't there, incase I hadn't been clear, its a movement thing. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: ziddey, 78 Guest(s)