Custom Resolution Utility (CRU)

[ToastyX]

(04-10-2015 08:36 PM)ksb Wrote:  Hi ToastyX and other forum members!
First HW setup:
GF GTX560 and analog TV (Sony Trinitron 29") connected to DVI-I via self-made H, V to H/V sync device to RGB input.
Seems TV supports only interlaced video.
Need to mention that there is no DDC connected as TV does not have it.
After fiddling a long time, tried using Linux and with a success. A lot of resolutions working, including example:
Modeline "720x576pali" 13.88 720 742 808 888 576 580 583 625 -hsync -vsync interlace (timings seems to be not important in this phase)
Under Windows added resolution through CRU:
[Image: CRU.png?_subject_uid=142558594&w...lGK6j8Iljg]
(currently "Custom extension block" is empty, but tried adding resolutions under that).
After restarting driver, have a default 640x480p @60Hz in NVIDIA control panel, which on TV looks like: [Image: TV640480.jpg?_subject_uid=142558594&...wm6gwsUpxw]
Added 720x576i to NVIDIA custom resolution:
[Image: EditCustomResolution.png?_subject_uid=14...MyRcN8r0cw]
And after pressing 'test' there is a acceptable picture on TV:
[Image: 20150401_223113a.jpg?_subject_uid=142558...R9ggme6HZw]
After agreeing to save this resolution, back to NVIDIA customize window:
[Image: Customize3.png?_subject_uid=142558594&am...NgTpZS50UA]
But under resolutions I don't have 720x576:
[Image: ChangeResolution2.png?_subject_uid=14255...T8VdXK_3zw]
(other variant - resolution exists in a list, but switches back to 640x480 immediately after pressing apply).
Seems that driver does not like interlaced resolutions...

Your images aren't loading. You linked to private dropbox URLs.