Custom Resolution Utility (CRU)

[Sayake]

(10-27-2015 01:21 PM)falkentyne Wrote:  

(10-27-2015 12:55 PM)ToastyX Wrote:  

(10-26-2015 07:21 AM)Sayake Wrote:  So I've been playing CSGO on 75hz 1024x768 thanks to this great tool, however I want to gave black bars, so I decided to enable gpu upscaling, however when I do that the overclock isn't taken into effect, and when i disable it the overclock is back, but there is no other way for me to get black bars, I've tried to play with my monitors options however when I head to the display option it says "cannot be used available in d-sub signal only" I'm using an AMD card and a LG E2242 monitor.

GPU scaling uses the native resolution. To use GPU scaling, you'd have to add 75 Hz at the native resolution if the monitor can handle that. Otherwise, you'll have to disable GPU scaling and use the monitor's scaling options.

(10-26-2015 02:42 PM)Sayake Wrote:  Ok i see it now, but the wide/original option is greyed out and its selected wide, cant change it.

Try setting the lower resolution first.

And make sure you disabled GPU scaling before setting the lower resolution.

You'll know if GPU scaling is disabled if you go into the monitor OSD's "information/system" area and it shows 1024x768. There's literally almost a 0% chance that WIDE/ORIGINAL would be greyed out if the monitor (not computer/video card) system OSD area says you're at 1024x768. That's impossible. (I remember even my old Samsung T220 had that option available).

If the information/system area says you're at 1920x1080, it means GPU scaling is *still* enabled. Make sure you created the resolution and restarted the driver and switched to it.

thanks, i've put the resolution to the desired one, and the wide/original was available, changed it, changed back to normal resolution and it has worked, thanks alot!