|
Custom Resolution Utility (CRU)
|
|
11-04-2015, 07:21 AM
(Last edited: 11-04-2015, 07:38 AM by Fidelity)
Post: #1754
|
|||
|
|||
|
RE: Custom Resolution Utility (CRU)
Hey guys, i'm using a BenQ XL2430T with a dual-link DVI and was able to reach with manual timings:
1920x1080 @ 129Hz Horizontal / Vertical Front porch: 88 / 4 Sync width: 44 / 5 Total Pixels: 2165 / 1500 Sync Polarity: + / + Refresh Rate: 193.50kHz / Pixel Clock: 418.93MHz Should i use +/- for the polarity or there's no problem in keeping it +/+? Checking by myself, i noticed that the automatic timings in the LCD - standard preset for 144Hz give a refresh rate of 166.610kHz, and if i change from 144 to 165.500Hz it goes up to 193.471kHz.. So what it means? The monitor says it's at 129hz but it is working like a 165hz? I'm new to the forum so i don't know how to post prints, but i have a link on imgur: http://imgur.com/bsP9P7Z Windows 10 Pro, GTX 750 with driver 358.50. I've installed the patch for the driver in the past, but formated the computer many times after it, now i'm completely stock, with no mods to the original driver from nvidia. Sorry for my bad english in case i made any mistake! |
|||
|
|
« Next Oldest | Next Newest »
|