|
Custom Resolution Utility (CRU)
|
|
12-05-2015, 07:03 PM
Post: #1836
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(12-01-2015 01:56 PM)ToastyX Wrote:(12-01-2015 02:28 AM)tondale@live.com Wrote: When I try to set the refresh rate to 100/120/144 the screen just goes "HDMI no signal" and then goes black for a little while before coming back and bringing my refresh rate back to 86Hz. (Which is what I currently have it set at as it's the highest I've been able to do so far.The VG248 does not support 100/120/144 Hz with HDMI. You have to use DVI. It's possible to use an HDMI-DVI cable, but that will send a single-link signal to the monitor. The monitor will display a "cable incorrect" message, but you can use the Menu button to dismiss it. The VG248 can handle 100/120 Hz with a single-link signal, but 144 Hz might not work. You should use "LCD reduced" to reduce the bandwidth required. Okay cool, are you sure that the single link DVI will be able to do 100/120hz? There's a lot of other sources I found that said that a single like DVI just cant carry that amount of bandwith. If it the single link DVI can handle it, then that will definitely be my go to route. |
|||
|
|
« Next Oldest | Next Newest »
|