Custom Resolution Utility (CRU)

[thathipsterasian]

(12-11-2015 04:54 AM)ToastyX Wrote:  

(12-11-2015 03:01 AM)thathipsterasian Wrote:  I'm having an issue with getting my BenQ XL2411Z to run at 144Hz through Windows settings. I have an i7 and an AMD Radeon HD6800. I've tried using the CRU and deleting all the detailed/standard resolutions and unchecking all the established resolutions and then creating a custom, but it still won't run at 1920x1080 @144hz. All drivers are up to date and neither AMD CCC, Windows or CRU seem to be able to give me 144hz.

Edit: Using a DVI-D cable with a DVI-I port don't know if that helps with anything... (For some reason this case only has two dvi-i ports and no dvi-d)

Try the other DVI port. 6000-series cards only have one dual-link DVI port. The other is single-link DVI.

144 Hz should already exist in the default extension block. You shouldn't need to use CRU to add 144 Hz unless you want to use a custom extension block. If you need to add it manually, you must use the "LCD reduced" timing option.

Well, i've tried both DVI ports and neither have done anything.