Custom Resolution Utility (CRU)
|
12-28-2015, 03:38 AM
Post: #1908
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(12-28-2015 03:23 AM)zamar19 Wrote: And what the TV EDID says about max refresh rate and timings range & standards supported - check it with MonInfo. Try LCD Standard timings in CRU. this is what shows moninfo Timing characteristics Horizontal scan range.... 15-81kHz Vertical scan range...... 24-75Hz Video bandwidth.......... 230MHz CVT standard............. Not supported GTF standard............. Not supported Additional descriptors... None Preferred timing......... Yes Native/preferred timing.. 1920x1080p at 60Hz (16:9) Modeline............... "1920x1080" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Detailed timing #1....... 1366x768p at 60Hz (16:9) Modeline............... "1366x768" 85.500 1366 1436 1579 1792 768 771 774 798 +hsync +vsync Standard timings supported 720 x 400p at 70Hz - IBM VGA 640 x 480p at 60Hz - IBM VGA 640 x 480p at 67Hz - Apple Mac II 640 x 480p at 72Hz - VESA 640 x 480p at 75Hz - VESA 800 x 600p at 60Hz - VESA 800 x 600p at 72Hz - VESA 800 x 600p at 75Hz - VESA 832 x 624p at 75Hz - Apple Mac II 1024 x 768p at 60Hz - VESA 1024 x 768p at 70Hz - VESA 1024 x 768p at 75Hz - VESA 1280 x 1024p at 75Hz - VESA 1152 x 870p at 75Hz - Apple Mac II 1152 x 864p at 75Hz - VESA STD 1280 x 720p at 60Hz - VESA STD 1280 x 800p at 60Hz - VESA STD 1280 x 1024p at 60Hz - VESA STD 1440 x 900p at 60Hz - VESA STD 1600 x 900p at 60Hz - VESA STD 1680 x 1050p at 60Hz - VESA STD thanks zamar |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 79 Guest(s)