Custom Resolution Utility (CRU)

[MightyUnit]

(12-31-2015 05:30 AM)ToastyX Wrote:  

(12-28-2015 05:36 AM)MightyUnit Wrote:  You mean this, correct? If not please tell me what you need. Thank you for helping me!

I wanted a .bin file, but this has the information I need. The only problem I see is the monitor says there's an extension block when there isn't one, but the Catleap/QNIX monitors have the same problem, and those monitors work with NVIDIA cards, although they did have similar black screen issues with certain driver versions until NVIDIA fixed the problem.

Have you tried anything with CRU? Setting a custom extension block would fix the EDID, but I don't think that will work if the monitor isn't detected properly. This seems like a driver issue that NVIDIA needs to fix.

I don't think the EDID is write-protected on these monitors, so you might be able to fix the problem by using CRU to export an EDID with no extension block and flashing the EDID using one of these methods: http://www.blurbusters.com/zero-motion-b...dware-mod/

Thanks for the reply Toastyx,

What would you do if you were me? Flash the display with the EDID after removing the empty extension block (if I understood that correctly) or try to tell Nvidia about this?

EDIT: concerning EDID programming what about software called EDID programmer? I used it to flash an LG L245WP from within windows the other day. Here is a link to it: http://pg-anatolich.narod.ru/EDIDProgrammer_v1.2.1.zip

EDIT: can .bin files be renamed .edid? EDIDprogrammer can read and write .edid and CRU exports in .bin