Custom Resolution Utility (CRU)

[Lewd]

Greetings,

First of all, thank you for your software.

Usually I make a point of honor to resolve everything alone, but my understanding is probably too limited for this !

Hardware etc :

- Asus 24" VX248H (recognized - HDMI) / Asus 23.6" VE247H (recognized - DVI) / Asus 22" VW222S (DP>VGA (active one) - PNP recognized -1680x1050 as native res) ;
- R9 FURY NITRO ;
- Eyefinity 4800x1200 with Catalyst 15.11.1 (cuz I cannot get Eyefinity working with last Crimson);
- Win10 64 Pro ;

Of course, problem is that 4800x1200 doesn't perfectly fit because of the VW222S native res, then I'm seeking to add 4800x1080 or 4800x1050.

Separately (Eyefinity disabled etc), the VW222S only propose 1600x1200 (I don't know why). I've tried to add 1680x1080 60Hz to each screen as detailed res, in order to obtain 4800x1080 with Eyefinity, and two different results come out of it after restart : 80% of the time, VW222S turns black while the other screens are ok (with 1680x1080 added) / 20% of the time, 248H & 247H turn black and 222S keeps working, except when I try to choose the new added 1680x1080, he turns black and the two other screens become operational again.

I also tried to just add 1680x1050 60Hz to the 222S (as 248/247 already propose that res), but same issue. Have tried another DP port etc...

In a word, I can't obtain all screens operationnal with 1680x1080/1050 added.

4800x1200 Eyefinity is very ugly (too stretched etc).

Considering the res I'm trying to add, I don't think it's relative to the clock speed patch. What am I doing wrong ?

Sorry for my crappy english and thank you in advance for your answer.