Custom Resolution Utility (CRU)
|
11-30-2016, 10:47 PM
Post: #2450
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(11-30-2016 07:43 PM)Altberta Wrote: Can I modify EDID of my monitor? I can set 100hz now with DP from your help, but I didn't set 100hz because color depth is fixed on 6 bpc. Below 89hz, I can set 8 bpc.That's not an EDID problem. 2560x1440 @ 100 Hz at 8 bpc requires DisplayPort 1.2. Either your monitor is not reporting itself correctly, or it doesn't support DisplayPort 1.2 speeds. (11-30-2016 07:43 PM)Altberta Wrote: Also, My screen bezel is get some truncation with FreeSync (About 4 pixels). You have fix solution? I did attach screenshots. (FreeSync on/off)That's a monitor problem. Either it's not reporting the correct timing parameters, or there's a firmware bug. You can try changing the timing parameters to see if that helps, but I don't know what will work with that monitor. |
|||
« Next Oldest | Next Newest »
|