|
Custom Resolution Utility (CRU)
|
|
02-06-2017, 03:04 AM
Post: #2590
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(02-04-2017 10:15 PM)ToastyX Wrote: If the TV supports 3840x2160 @ 60 Hz with HDMI 2.0, then you shouldn't need to use CRU or the pixel clock patcher. It should just work out of the box with the Club3D adapter. CRU 1.3 can read extension blocks, so you shouldn't need to add anything manually. CRU should already list 3840x2160 @ 60 Hz as one of the resolutions, possibly in the extension block. There should also be an HDMI 2.0 data block in the extension block. Should but doesn't. I think it is the graphics card to be honest. the HDMI port is 1.4 and I think those guys at PowerColor cheaped out and used a DP 1.0 instead of 1.2 which explains why I cannot push above 30fps. Seems like we are at a stale mate here. What do you recommend? Once the new GTX 2080s come out, which I hear is around March/April/May, the GTX 1070 will be worthless (~$200s) and I will snag one there at a discount to remedy this permanently. I'm never buying cheap Graphics Cards again! Extra couple of $$$ in addition to the $200 I shelled out would have precluded this all together. |
|||
|
|
« Next Oldest | Next Newest »
|