Custom Resolution Utility (CRU)
|
03-15-2017, 10:25 PM
Post: #2690
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(03-13-2017 04:42 PM)torankusu Wrote: I installed Monitorinfo and saved the Bin file, imported it to CRU 1.3 but here is where im lost.You don't need to do this. CRU 1.3 can read extension blocks with NVIDIA, and the QNIX doesn't have any extension blocks anyway. (03-14-2017 12:34 AM)torankusu Wrote: update: i did thisThe QNIX doesn't have a scaler, so it only supports 2560x1440. Lower resolutions will only work with GPU scaling. You don't need to remove GeForce Experience. (03-14-2017 03:23 AM)torankusu Wrote: All we need to do is add the native resolution of the monitor 2560x1440 and add the refresh rate 120hz. so i end up with 2 entries on detailed resolutions, 1440p @ 60 (default one) and 1440p @ 120hz (the extra one that i added)Your monitor or video card might not be able to handle the high pixel clock required for 2560x1440 @ 120 Hz. Try the "LCD reduced" timing option. If that doesn't help, try reducing the totals further to 2652x1445. If that still doesn't help, you'll have to try a lower refresh rate. |
|||
« Next Oldest | Next Newest »
|