Custom Resolution Utility (CRU)

[ToastyX]

(02-23-2018 06:07 AM)peterjcat Wrote:  Thanks to CRU I was able to add BT2020RGB BT2020YCC to the Monitor Advanced Color Capabilities, but it is still missing AdvancedColorSupported which I think is why I'm still not getting the HDR option.

I wondered whether this had something to do with the Display Luminance settings, which show higher minimum and much lower maximum (ie less dynamic range) on the AVR compared to the TV.

So I wondered first whether there was any way to adjust the Display Luminance settings using CRU? These are apparently stored in the EDID or an override according to the Windows documentation. But I don't know whether CRU can address these (or even if that is the issue).

I don't know what it means by AdvancedColorSupported. CRU can't edit HDR data directly, but it can copy/paste and import extension blocks with the data. The problem is CRU can't read extension blocks with Intel GPUs, so you can't copy/paste the data. See if you can export the full EDID using Monitor Asset Manager: http://www.entechtaiwan.com/util/moninfo.shtm

Try getting the full EDID when connected directly, then import that into CRU when connected to the AVR.