NVIDIA Pixel Clock Patcher

[ToastyX]

(11-07-2015 05:59 PM)Lumonaut Wrote:  On 358.87 I was able to patch and find all values but cannot add custom resolutions. Even with "Enable resolutions not exposed by the display" checked in Nvidia Control Panel any custom resolution at all gives me "Test failed. Custom resolution 2560x1440 at 96Hz (32-bit) is not supported by your display."

I have a 980 Ti. Any ideas?

You shouldn't need the patch to add 2560x1440 @ 96 Hz when using the NVIDIA control panel with the 980 Ti.

You didn't mention what monitor you have, but I'm assuming it's the QNIX/X-Star monitor because of the resolution. Did you install the monitor driver?

https://www.monitortests.com/qnix.zip

If you're using Windows 8 or later, you'll have to temporarily disable driver signature enforcement first: http://www.howtogeek.com/167723/how-to-d...d-drivers/

Then install the INF file using the Device Manager: Monitors -> Right-click "Generic PnP Monitor" -> Update Driver Software... -> Browse my computer for driver software -> Let me pick from a list of device drivers on my computer -> Have Disk... -> Browse for the Qnix.inf file -> OK -> Next -> Install this driver software anyway

Then reboot and it should let you add the resolution. If not, you can try using CRU instead, which requires the patch.