NVIDIA Pixel Clock Patcher

[Ninjawithagun]

(06-28-2013 10:24 AM)ToastyX Wrote:  

(06-27-2013 12:54 AM)Ninjawithagun Wrote:  Yup, I used the full SLI patch. But, when I restart my computer for the patch to take effect the NVidia drivers are no longer recognized and the NVidia control panel is gone.

That's because test mode is not enabled. The patch definitely works with Windows 8.

(06-27-2013 12:54 AM)Ninjawithagun Wrote:  Also, something else I wanted to point out is that the Test Mode patch does not work in Windows 8 Pro. Not sure why, but I get a message that states "Test Mode Failed".

The test mode program should work in Windows 8. It's the same as typing "bcdedit /set testsigning on" in an elevated command prompt. If typing it in manually doesn't work, then you have an unusual boot configuration.

If you're dual booting, the boot store might be on a another partition. You'll have to run Disk Management and assign the partition to a drive letter, then run a command prompt as administrator and specify the boot store manually: bcdedit /store X:\Boot\BCD /set testsigning on

Also, make sure secure boot is not enabled in the BIOS because that will prevent test mode from working in Windows 8.

Thanks ToastyX!! That did the trick. I went into my UEFI BIOS and disabled Secure Boot and everything works perfectly now. You da' man!