Post Reply
Surround Issue
02-03-2016, 07:16 PM
Post: #1
Surround Issue
Okay I have 3 screens that run 1080p, 2x Samsung P2770HD 1x Samsung S27B350.
When ever I try to enable surround it only allows me to go to 1050, I looked under the Rez for the screens the 2x P2770HD comes up at 1920x1080 while the S27B350 comes out as 1080p I think that has something to do with it. If I set up surround with the 2x P2770HD the rez comes out to 1080. any ideas on how i can do surround with all 3 of my screens at 1080?


Screen Shots:

[Image: 2ef40d8b7becb1cc697e1bcf698b765b.png]
[Image: 66807a90a24259ff0954174da7c5a3a0.png]
[Image: 8cb35db4e5825877363ba1d1deac496d.png]
[Image: 433eb72985d41f129317bc4bf943e676.png]
[Image: 0da163cdf8b1bf3e4b98058fb6e62cff.png]
Find all posts by this user
Quote this message in a reply
02-06-2016, 04:59 PM
Post: #2
RE: Surround Issue
1080p is 1920x1080, so that shouldn't matter. What matters is the resolutions must share the same timing parameters. What timing parameters does CRU show for 1920x1080 @ 60 Hz for each monitor? It should be the first detailed resolution.
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 1 Guest(s)