Wrong resolution when restart

[CarlosCaco]

Hi, first thanks toastyx for cru, its great

I m on windows 8.1 x64 and have a GTX 570

Basically I use the pc as htpc conected to my HDTV

So I use cru to fine tune the movies refresh rate... 23,976 etc...

So i don t overclock the tv and don t have to use pixel clock patches

My tv is 1366x768, Windows say native is 1360x768 but on the sheets says 1366x768!and with this resolution I get perfect 1x1 pixel

Everything is good my refreshes a very good Tuned I get audio from hdmi...
But everytime I restart the computer the resolution is changed to 1024x768, that is quite annoyng... because everytime windows starts I have to change the resolution l
Doe anyone knows why this happening? And how fix it?
Thanks

[ToastyX]

The first detailed resolutions is considered the native resolution, so make sure 1366x768 is listed first, and remove any other resolutions that you don't need. Make sure you're using a custom extension block. I assume you are since you're getting audio.

Then run restart64.exe and press F8 for recovery mode. This will also reset the Windows screen resolution settings. Then try rebooting and see if it boots with the correct resolution.