Threaded Mode | Linear Mode

***ToastyX*** · Yesterday, 09:00 PM

(Yesterday 08:32 PM)Freekie Wrote: My CRU broke after downloading Nvidia driver 580.88. I downloaded the driver to play the BF6 Beta as it was the only way to play. After doing so I realized my CRU was broken with my custom resolution no longer showing up. Everything was pushed to native resolution of 2560x1440. I reverted my Nvidia drivers back to 576.28 but still can't seem to get my custom resolutions to come back when going back through the CRU settings ( Not a monitor wizard just followed a youtube tutorial and it worked last time ). This monitor has the custom resolution section greyed out in the nvidia control panel.

If anyone can help me get 2304x1440 into my choices for custom resolutions that would be amazing as this is driving me crazy.

My Equipment:
Monitor - mag271qx oled
GPU - TUF Gaming 3080
Cables - Display Port

It's this issue mentioned in the first post:

NVIDIA and DSC - ToastyX Wrote:NVIDIA's driver currently ignores EDID overrides when Display Stream Compression (DSC) is active and the maximum resolution @ refresh rate combination exceeds the GPU's single-head limit (around 1350 MHz pixel clock for RTX 3000/4000-series GPUs). Please report this issue to NVIDIA. 5000-series GPUs have a higher single-head limit. 3000/4000-series GPUs can use SRE for custom GPU-scaled resolutions but not custom refresh rates: https://www.monitortests.com/forum/Threa...Editor-SRE

The only way CRU could have worked before is either you disabled DSC in the monitor or you used this registry tweak:
https://www.reddit.com/r/OLED_Gaming/com...and_other/
That would disable 360 Hz at the native resolution though.

Freekie · Yesterday, 10:24 PM

(Yesterday 09:00 PM)ToastyX Wrote:
(Yesterday 08:32 PM)Freekie Wrote: My CRU broke after downloading Nvidia driver 580.88. I downloaded the driver to play the BF6 Beta as it was the only way to play. After doing so I realized my CRU was broken with my custom resolution no longer showing up. Everything was pushed to native resolution of 2560x1440. I reverted my Nvidia drivers back to 576.28 but still can't seem to get my custom resolutions to come back when going back through the CRU settings ( Not a monitor wizard just followed a youtube tutorial and it worked last time ). This monitor has the custom resolution section greyed out in the nvidia control panel.

If anyone can help me get 2304x1440 into my choices for custom resolutions that would be amazing as this is driving me crazy.

My Equipment:
Monitor - mag271qx oled
GPU - TUF Gaming 3080
Cables - Display Port

It's this issue mentioned in the first post:

NVIDIA and DSC - ToastyX Wrote:NVIDIA's driver currently ignores EDID overrides when Display Stream Compression (DSC) is active and the maximum resolution @ refresh rate combination exceeds the GPU's single-head limit (around 1350 MHz pixel clock for RTX 3000/4000-series GPUs). Please report this issue to NVIDIA. 5000-series GPUs have a higher single-head limit. 3000/4000-series GPUs can use SRE for custom GPU-scaled resolutions but not custom refresh rates: https://www.monitortests.com/forum/Threa...Editor-SRE
The only way CRU could have worked before is either you disabled DSC in the monitor or you used this registry tweak:
https://www.reddit.com/r/OLED_Gaming/com...and_other/
That would disable 360 Hz at the native resolution though.

Some how I have the custom resolution inside the game application (It shows 2560x1440, but this is definitely the 2304x1440 I put in CRU), yet it does not show up in my nvidia or windows display. Yet my mouse alignment is very much off.