Custom Resolution Utility (CRU)

[MysticWizard]

(09-01-2022 05:29 AM)ToastyX Wrote:  

(08-31-2022 02:09 PM)MysticWizard Wrote:  I followed the following guide https://www.intel.com/content/www/us/en/...l-nuc.html

That guide can't possibly work because it's missing the HDMI data block. You need to make sure the extension block has an HDMI data block.

The easiest thing you can do is try importing this file using CRU: https://www.monitortests.com/download/da...-audio.dat

If you get no sound with that, then there's a problem with the driver.

Allright I managed to get it to work by following the following steps:
1) Download the hdmi2-bitstream.dat - HDMI 2.0 support with bitstreaming audio formats
2) Open it in CRU
3) Add 5.1 speaker setup and changing all bitstream formats to 5.1
4) Export as .exe
6) Run .exe
7) Reboot

After some testing, it does see 5.1 now but when I test speaker sound, only the stereo front left and right work.

Partial Victory: