Custom Resolution Utility (CRU)

[marcell]

Hi all, I've been messing around with my old desktop that has an Intel HD Graphics 2500 in it, i used the .exe method as it is the alternative method for older generation intel gpu's, but it seems that it sort of messed up some things (which is most likely my fault), i dont remember in what order these happened but after installing the EDID im pretty sure i got the option to pick a higher resolution than what my display's maximum resolution is, I also had some problems when playing VALORANT, where the game would have my monitor name as blank and i was unable to change the resolution of the game as it would just be stuck at custom. I'm currently using a random off-brand 1280x1024 TV as my monitor, eventually i just tried resetting CRU with the reset-all.exe and restarting my graphics driver, now i dont exactly remember if it happened exactly after i did that since i fiddled around a lot of settings, but my monitor became a generic non-PnP panel in device manager, so i looked up this thread and searched if any other person have had this problem which thankfully there was. And so i did the fix which was basically exporting an .inf file and installing it. which worked fine as now my monitor is recognized by device manager, but the higher resolution option than my display's maximum resolution and the valorant not recognizing my monitor's resolution still persists. Is there anything i could do to just factory reset my monitor/tv's EDID back before i used CRU? or maybe a custom EDID that i can use? I know this was probably caused by my negligence of not understanding it properly before using it but any help would be appreciated. Thank you if you read the whole thing and apologies if its too long.